 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
AM652X データシート(PDF) 128 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
AM652X データシート(HTML) 128 Page - Texas Instruments |
|
|
128 / 277 page  128 AM6548, AM6528, AM6546 AM6526, AM6527 SPRSP08I – NOVEMBER 2017 – REVISED DECEMBER 2019 www.ti.com Submit Documentation Feedback Product Folder Links: AM6548 AM6528 AM6546 AM6526 AM6527 Specifications Copyright © 2017–2019, Texas Instruments Incorporated Table 5-5. I2C OPEN DRAIN DC Electrical Characteristics (continued) over recommended operating conditions (unless otherwise noted) PARAMETER MIN TYP MAX UNIT IOZ Total leakage current through the driver/receiver combination, which may include an internal pull-up or pull-down. This value represents the maximum current flowing in or out of the pin while the output driver is disabled, the pull-up or pull-down is inhibited, and the input is swept from VSS to VDD. 80 µA VOL Low-level output voltage at 3-mA sink current 0.4 V (1) Voltage Input High Steady State (VIHSS) should be maintained when the signal is not transitioning. (2) Voltage Input Low Steady State (VILSS) should be maintained when the signal is not transitioning. Table 5-6. Analog OSC Buffers DC Electrical Characteristics over recommended operating conditions (unless otherwise noted) PARAMETER MIN TYP MAX UNIT BALL NAMES: OSC1_XI / WKUP_OSC0_XI BALL NUMBERS: C22 / AD5 HIGH FREQUENCY OSCILLATOR VIH High-level input voltage 0.65 × VDDS(1) V VIL Low-level input voltage 0.35 × VDDS(1) V BALL NAMES: WKUP_LFOSC0_XI BALL NUMBERS: AE4 LOW FREQUENCY OSCILLATOR VIH High-level input voltage 0.65 × VDDA_WKUP V VIL Low-level input voltage 0.35 × VDDA_WKUP V (1) VDDS stands for corresponding power supply. For WKUP_OSC0_XI, the corresponding power supply is VDDA_WKUP. For OSC1_XI, the corresponding power supply is VDDS_OSC1. Table 5-7. UHS-I MMC (8-bit PHY) Buffers DC Electrical Characteristics over operating free-air temperature range (unless otherwise noted) PARAMETER MIN NOM MAX UNIT BALL NAMES in Mode 0: MMC0_CLK / MMC0_CMD / MMC0_DS / MMC0_DAT[7:0] / MMC1_CLK / MMC1_CMD / MMC1_DAT[3:0] / MMC0_CALPAD / MMC1_CALPAD BALL NUMBERS: A24 / A25 / A26 / B25 / B26 / B27 / C25 / C26 / C27 / C28 / D25 / D26 / D27 / D28 / E24 / E25 / E27 / D24 / F23 VIH Input High-Level Voltage 0.65 × VDDS(1) V VIL Input Low-Level Voltage 0.35 × VDDS(1) V VOH Output High-Level Threshold 0.75 × VDDS(1) V VOL Output Low-Level Threshold 0.125 × VDDS(1) V IIN Input Leakage Current 10 µA (1) VDDS stands for corresponding power supply (that is VDDSHV6 or VDDSHV7). For more information on the power supply name and the corresponding ball, see Table 4-1, POWER [9] column. |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
