LIS25BA datasheet(19/32 Pages) STMICROELECTRONICS

部品番号	LIS25BA

部品情報	MEMS digital output motion sensor: low-noise, high-bandwidth 3-axis accelerometer with TDM interface

PDF	32 Pages

Scroll/Zoom	100%

メーカー	STMICROELECTRONICS [STMicroelectronics]

ホームページ	http://www.st.com

Logo

19 / 32 page

DocID031510 Rev 4

19/32

LIS25BA

TDM interface specifications

4.5.3

Configuration 3



Delayed: SLOT0 data MSB is sampled on the second rising edge of BCLK after rising

edge of WCLK (delayed I²C register TDM_CTRL_REG (2Eh) bit 6 equal to one)



Data valid: data valid on the rising edge of BCLK (data_valid I²C register

TDM_CTRL_REG (2Eh) bit 5 equal to zero)

Figure 11. WCLK, SDOUT change on the falling edge of BCLK and are valid on the

rising edge of BCLK, delayed

Note:

Setup and hold times are defined in Table 6: TDM interface characteristics.

4.5.4

Configuration 4



Delayed: SLOT0 data MSB is sampled on the second falling edge of BCLK after rising

edge of WCLK (delayed I²C register TDM_CTRL_REG (2Eh) bit 6 equal to one)



Data valid: data valid on the falling edge of BCLK (data_valid I²C register

TDM_CTRL_REG (2Eh) bit 5 equal to one)

Figure 12. WCLK, SDOUT change on the rising edge of BCLK and are valid on the

falling edge of BCLK, delayed

Note:

Setup and hold times are defined in Table 6: TDM interface characteristics.

LIS25BA データシート(PDF) 19 Page - STMicroelectronics