| データシートサーチシステム |
|
4026 データシート(PDF) 4 Page - 3M Electronics |
|
|
|||||||||||||||||||||||||||||
4026 データシート(HTML) 4 Page - 3M Electronics |
|
4 / 5 page ![]() 3M™ Double Coated Urethane Foam Tapes 4004 • 4008 • 4016 • 4026 • 4032 • 4052 • 4056 • 4085 Features • The natural colored urethane foam tape products vary in color from white to light yellow. The color will change to light yellow upon exposure to sunlight (ultraviolet radiation). This color change is normal and does not affect tape performance. • 3M™ Double Coated Urethane Foam Tape 4026 is available in roll form and die- cut pieces. Die-cut pieces of 3M tape 4026 is available in 3/4" or 1" squares, either individual pieces double linered with an extended liner on one side or in pads of 48 squares. • 3M™ Double Coated Urethane Foam Tape 4085 combines conformability with high immediate adhesion to most plastics including ABS, polycarbonate, acrylic, polyethylene and polypropylene as well as metal and paint. 3M tape 4085 tears easily which makes it ideal for hand application. Application Techniques • Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improve bond strength. • To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. Typical surface cleaning solvents are isopropyl alcohol* and water (rubbing alcohol) or heptane. • Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory. *Note: Be sure to follow the manufacturer’s precautions and directions for use when using solvents. Application Ideas The urethane foam tapes are generally ideal for interior applications or for exterior applications where the tape will be protected from the environment. The urethane foam is open cell. 3M™ Double Coated Urethane Foam Tape 4004 – Bond mirrors to walls or furniture 3M™ Double Coated Urethane Foam Tape 4008 – Bond acoustic panels to walls 3M™ Double Coated Urethane Foam Tape 4016 – Mount interior signs and nameplates 3M™ Double Coated Urethane Foam Tape 4026 – Mount air fresheners and soap dispensers 3M™ Double Coated Urethane Foam Tape 4032 – Attach wire clips to various surfaces 3M™ Double Coated Urethane Foam Tape 4052 – Bond window to microwave oven doors Mount electrical channel to wall surfaces 3M™ Double Coated Urethane Foam Tape 4056 – Mount wall corner protectors 3M™ Double Coated Urethane Foam Tape 4085 – Attach wire clips Attach air fresheners |
|
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |