| データシートサーチシステム |
|
PFS154 データシート(PDF) 13 Page - PADAUK Technology. |
|
|
|||||||||||||||||||||||||||||
PFS154 データシート(HTML) 13 Page - PADAUK Technology. |
|
13 / 91 page ![]() PFS154 8bit MTP Type IO Controller ©Copyright 2020, PADAUK Technology Co. Ltd Page 13 of 91 PDK-DS-PFS154_CN_V105 –Jun. 9, 2020 Pin Name Pin & Buffer Type Description PA3 / TM2PWM / COM4 / CIN1- / PG2PWM IO ST / CMOS / Analog This pin can be used as: (1) Bit 3 of port A. It can be configured as digital input or two-state output, with pull-up resistor by software independently. (2) Minus input source 1 of comparator. (3) Output of 8-bit Timer2 (TM2) (4) COM4 to provide (1/2 VDD) for LCD display (5) Output of 11-bit PWM generator PWMG2 When this pin is configured as analog input, please use bit 3 of register padier to disable the digital input to prevent current leakage. This pin can be used to wake-up system during sleep mode; however, wake-up function is also disabled if bit 3 of padier register is “0”. PA0 / INT0 / CO / COM2 / PG0PWM IO ST / CMOS / Analog This pin can be used as: (1) Bit 0 of port A. It can be configured as digital input or two-state output, with pull-up resistor by software independently. (2) External interrupt line 0. Both rising edge and falling edge are accepted to request interrupt service. (3) Output of comparator (4) Output of 11-bit PWM generator PWMG0 (5) COM2 to provide (1/2 VDD) for LCD display When this pin is configured as analog input, please use bit 0 of register padier to disable the digital input to prevent current leakage. This pin can be used to wake-up system during sleep mode; however, wake-up function is also disabled if bit 0 of padier register is “0”. PB7 / TM3PWM / CIN3- / PG1PWM IO ST / CMOS / Analog This pin can be used as: (1) Bit 7 of port B. It can be configured as digital input or two-state output with, pull-up resistor by software independently. (2) Minus input source 3 of comparator. (3) Output of 8-bit timer Timer3 (TM3) (4) Output of 11-bit PWM generator PWMG1 When this pin is configured as analog input, please use bit 7 of register pbdier to disable the digital input to prevent current leakage. This pin can be used to wake-up system during sleep mode; however, wake-up function is also disabled if bit 7 of pbdier register is “0”. |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |