VSC8150 datasheet(13/20 Pages) VITESSE

13 / 20 page

Page 13

10/12/98

741 Calle Plano, Camarillo, CA 93012 • 805/388-3700 • FAX: 805/987-5896

VITESSE

SEMICONDUCTOR CORPORATION

Preliminary Data Sheet

VSC8150

2.488Gb/s SONET/SDH

Overhead Monitor

G52186-0, Rev. 3.0

Absolute Maximum Ratings

Power Supply Voltage (VCC) Potential to GND ............................................................................ -0.5 V to +4.3 V

TTL Input Voltage Applied ...........................................................................................................-0.5 V to + 5.5V

ECL Input Voltage Applied ................................................................................................... +0.5 V to VTT -0.5 V

Output Current (IOUT)................................................................................................................................... 50 mA

Case Temperature Under Bias (TC) ................................................................................................-55

o to + 125oC

Storage Temperature (TSTG)............................................................................................................-65

o to + 150oC

Note: Caution: Stresses listed under “Absolute Maximum Ratings” may be applied to devices one at a time without causing per-

manent damage. Functionality at or exceeding the values listed is not implied. Exposure to these values for extended peri-

ods may affect device reliability.

Recommended Operating Conditions

Power Supply Voltages (VCC)...............................................................................................................+3.3V

Power Supply Voltages (VMM) ..............................................................................................................+2.0V

Commercial Operating Temperature Range (T) .................................................................................... 0o to 85oC

Notes: (1) Lower limit of speciﬁcation is ambient temperature and upper limit is case temperature.

(2) Customer may require cooled/heatsink environment to meet thermal requirements of 100PQFP.

(3) Contact factory for package thermal performance information.

ESD Ratings

Proper ESD procedures should be used when handling this product. The VSC8150 is rated to the following

ESD voltages based on the human body model:

1. All pins are rated at or above 1500V.

VSC8150 データシート(PDF) 13 Page - Vitesse Semiconductor Corporation

VSC8150 データシート(HTML) 13 Page - Vitesse Semiconductor Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

データシートダウンロード