Preliminary

PLL702-03

Low EMI Peripheral Clock Generator for Notebook PCs

47745 Fremont Blvd., Fremont, California 94538 TEL (510) 492-0990 FAX (510) 492-0991

Rev 10/06/02 Page 5

Electrical Specifications

1. Absolute Maximum Ratings

PARAMETERS

SYMBOL

MIN.

MAX.

UNITS

Supply Voltage Range

7

V

Input Voltage Range

V

Output Voltage Range

V

Soldering Temperature

260

°C

Storage Temperature

-65

150

°C

Ambient Operating Temperature*

-40

85

°C

Exposure of the device under conditions beyond the limits specified by Maximum Ratings for extended periods may cause

permanent damage to the device and affect product reliability. These conditions represent a stress rating only, and functional

operations of the device at these or any other conditions above the operational limits noted in this specification is not implied.

* Note: Operating Temperature is guaranteed by design for all parts (COMMERCIAL and INDUSTRIAL), but tested for

INDUSTRIAL grade only.

2. AC Specification

PARAMETERS

CONDITIONS

MIN.

TYP.

MAX.

UNITS

Input Frequency (to be set via XTAL_SEL)

+/- 20ppm accuracy

24.576

MHz

SST modulation sweep rate

28

kHz

Output Rise Time

0.8V to 2.0V with no load

1.5

ns

Output Fall Time

2.0V to 0.8V with no load

1.5

ns

Duty Cycle

At VDD/2

45

50

55

%

Duty Cycle 8MHz clock

At VDD/2

43

50

57

%

Max. Absolute Period Jitter

Long term, No SST

150

ps

Max. Jitter, cycle to cycle

Long term + Short term

120

ps