| データシートサーチシステム |
|
STM32G030F6 データシート(PDF) 34 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32G030F6 データシート(HTML) 34 Page - STMicroelectronics |
|
34 / 94 page ![]() Pinouts, pin description and alternate functions STM32G030x6/x8 34/94 DS12991 Rev 4 - 20 27 42 PB3 I/O FT - SPI1_SCK/I2S1_CK, TIM1_CH2, USART1_RTS_DE_CK, EVENTOUT - - 20 28 43 PB4 I/O FT - SPI1_MISO/I2S1_MCK, TIM3_CH1, USART1_CTS, TIM17_BK, EVENTOUT - 8 20 29 44 PB5 I/O FT - SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM16_BK, I2C1_SMBA WKUP6 8 20 30 45 PB6 I/O FT_f - USART1_TX, TIM1_CH3, TIM16_CH1N, SPI2_MISO, I2C1_SCL, EVENTOUT - - - - 46 PB7 I/O FT_f - USART1_RX, SPI2_MOSI, TIM17_CH1N, I2C1_SDA, EVENTOUT - 1 1 31 - PB7 I/O FT_fa - USART1_RX, SPI2_MOSI, TIM17_CH1N, I2C1_SDA, EVENTOUT ADC_IN11 1 1 32 47 PB8 I/O FT_f - SPI2_SCK, TIM16_CH1, I2C1_SCL, EVENTOUT - 1 2 1 48 PB9 I/O FT_f - IR_OUT, TIM17_CH1, SPI2_NSS, I2C1_SDA, EVENTOUT - 1. PC13, PC14 and PC15 are supplied through the power switch. Since the switch only sinks a limited amount of current (3 mA), the use of GPIOs PC13 to PC15 in output mode is limited: - The speed should not exceed 2 MHz with a maximum load of 30 pF - These GPIOs must not be used as current sources (for example to drive a LED). 2. After an RTC domain power-up, PC13, PC14 and PC15 operate as GPIOs. Their function then depends on the content of the RTC registers. The RTC registers are not reset upon system reset. For details on how to manage these GPIOs, refer to the RTC domain and RTC register descriptions in the RM0444 reference manual. 3. As in SO8N device, the PA0, PA1, and PA2 GPIOs are bonded with NRST on the pin 4, low level applied to any of these GPIOs provokes the device reset. To prevent the risk of spurious resets, keep these GPIOs configured at all times as analog or digital inputs (as opposed to output or alternate function). 4. Pins PA9 and PA10 can be remapped in place of pins PA11 and PA12 (default mapping), using SYSCFG_CFGR1 register. 5. Upon reset, these pins are configured as SW debug alternate functions, and the internal pull-up on PA13 pin and the internal pull-down on PA14 pin are activated. Table 12. Pin assignment and description (continued) Pin Pin name (function upon reset) Alternate functions Additional functions |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |