- 100 -

All Data Subject To Change Without Notice

www.andersonpower.com

Wire Entrance

[ 28.4 ]

1.12

[ 11.1 ]

0.44

Manual Release Bracket - Mounting Side *

Works with the Locking Side to ease mating and unmating connectors.

Description

Part Numbers

Minimum Quantity

66

25

10

Bracket and Hardware Kit

-

-

922G1

Bracket Only

B00229P1

-

-

Hardware Bag

-

106G6

-

* Torque value 50 (in - lbs) / 5.6 (Nm)

NOTE: For assembly of brackets to housing only

Manual Release Bracket - Locking Side with Cable Clamp *

Works with the Mounting Side to ease mating and unmating connectors.

Cable Size

Min / Max

Min / Max

Description

Inches O.D.

mm O.D.

Part Number

Minimum Quantity

10

Bracket and Hardware Kit w/ Clamp Kit

0.94 to 0.61

23.7 to 15.5

919

* Torque value 50 (in - lbs) / 5.6 (Nm)

NOTE: For assembly of bracket to housing only

The given wire O.D. information is an estimate. Cable clamps should be evaluated for

performance with the actual wire to be used.

Manual Release Bracket - Locking Side no Cable Clamp *

Works with the Battery side to ease mating and unmating connectors.

Description

Part Number

Minimum Quantity

10

Bracket and Hardware Kit No Clamp Kit

919G1

* Torque value 50 (in lbs) / 5.6 (N - M)

NOTE: For assembly of bracket to housing only

Reducing Bushings: for Use with Contact Part Number 907

Use with contact part number 907-BK to allow a smaller wire to be used

with the connector. Electrical capability is derated with smaller wire.

Contact Barrel Size

Wire Size

AWG mm

AWG mm²

Part Numbers

Minimum Quantity

500

100

2/0

67.4

1/0

53.5

5918-BK 5918

Mounting Plate

Hardware