AS108 datasheet(5/10 Pages) PICO

5 / 10 page

PicoSource® AS108 Agile Synthesizer

Parameter step increment values and

the saving and recall of user settings are

addressed under the Settings tab.

You can also save to the device a modified

or custom power-up setting, allowing the

signal source to power up in a known state

without further connection or control over

USB.

Save, recall and other settings

Arbitrary parameter list

Import a parameter list file to generate

an arbitrary sequence of frequency/

level or phase/level points. The file is in a

straightforward comma-separated values

(CSV) format that you can create using any

text editor or export from a spreadsheet

program.

PicoSynth 2 shows a summary of the file

contents to help you verify that you have

selected the correct file. You can program

the dwell time (time between points) and

trigger mode.

Trigger mode

Internal: run continuously with the

specified dwell time.

External Start: run the whole file,

with the specified dwell time, after

each trigger event.

External Step: generate one point

for each trigger event (ignoring

dwell time setting).

Frequency step size

Used by frequency up/down controls

Level step size

Used by level up/down controls

Phase step size

Used by phase up/down controls

AS108 データシート(PDF) 5 Page - Pico Technology Ltd.

AS108 データシート(HTML) 5 Page - Pico Technology Ltd.

Html Pages

1 2 3 4 5 6 7 8 9 10

データシートダウンロード