8

Outline drawings

STMicroelectronics delivers any of the dual source cap assemblies shown below. Both versions are transparent

for the customer, since the pad and substrate design are identical for both versions and have no impact on the

customer PCB design. Ranging performances, reflow, and technical parameters are identical for both module

designs presented in the second figure below.

Note:

The module drawings below are based on DM00726192, rev 4.0.

Figure 22. Outline drawing (1/5)

Figure 23. Outline drawing (2/5)

VL53L4ED

Outline drawings

DS14256 - Rev 3

page 25/39