| データシートサーチシステム |
|
TUSB2E221 データシート(PDF) 1 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
TUSB2E221 データシート(HTML) 1 Page - Texas Instruments |
|
1 / 65 page ![]() TUSB2E221 USB 2.0-eUSB2 Dual Repeater 1 Features • Compliance to USB 2.0 and eUSB2 (rev 1.2) • Support for low-speed (LS), full-speed (FS), high- speed (HS) • Best-in-class high-speed total jitter of 20ps • Register access protocol receptor capable • Dual independent repeater • 2:2 crossbar mux (DSBGA package only) • Host and device mode (DRD) support • Selection between 1.2V and 1.8V control or I2C levels using VIOSEL pin • Auto detection for I2C or strap-pin options – Three strap-pins for USB 2.0 high-speed channel compensation settings – I2C device interface for more configurations • Device variants – eUSB2 1.0V or 1.2V signaling interface – Four eUSB2 trace loss compensation levels for different product form-factors: 2.5, 5, 7.5, and 10 inches • Supports auto-resume ECR as well as L2 interrupt resume mode • CTA-936 USB Carkit UART support • Optional BC1.2 CDP battery charging and detection support • Optional GPIO modes for EQ pins for debug and I2C ↔ GPIOs through EQ0/1 • I2C accessible debug capabilities for manufacturing tests 2 Applications • Communications equipment • Enterprise systems • Notebooks and desktops • Industrial • Tablets • Portable electronics 3 Description The TUSB2E221 enables implementation of USB 2.0 compliant port on newer processors using lower voltage processes. The TUSB2E221 is a USB eUSB2-USB 2.0 repeater supporting both device and host modes. The TUSB2E221 supports USB low-speed (LS) and full- speed (FS) signals and high-speed (HS) signals. The TUSB2E221 is designed to interface with eUSB2 eDSPr or eUSPr operating at 1.2V single-ended signaling. The TUSB2E221 has multiple patented designs to provide robust interoperability, optimum performance, and power. For systems without an I2C interface, the device offers eight individual settings with three strap-pins for USB 2.0 channel Equivalent Series Resistance (ESR) up to 17.5Ω. Device variants are available for different levels of eUSB2 trace length compensation up to 10 inches. The I2C interface permits additional flexibility for users to fine tune the RX and TX settings of the device. The available settings are RX equalization, RX squelch threshold, RX disconnect thresholds, TX amplitude, TX slew rate and TX pre-emphasis. Various debug options are available through the three EQ pins that can be configured to monitor various USB bus states or interrupt as well as CTA-936 UART mode control that can provide SoC debug capabilities. EQ0 and EQ1 can be used as general purpose I2C to GPIOs bridge. Package Information PART NUMBER PACKAGE(1) PACKAGE SIZE(2) TUSB2E221 VBW (WQFN, 20)(3) 3mm × 3mm YCG (DSBGA, 25) 2mm × 2mm (1) For all available packages, see the orderable addendum at the end of the data sheet. (2) The package size (length × width) is a nominal value and includes pins, where applicable. (3) Package is preview only. TUSB2E221 SNLS757B – JUNE 2024 – REVISED NOVEMBER 2024 An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. UNLESS OTHERWISE NOTED, this document contains PRODUCTION DATA. |
同様の部品番号 - TUSB2E221 |
|
同様の説明 - TUSB2E221 |
|
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |