www.ti.com

2.2.1

If You Need Assistance

Important Notice

About This Guide

This reference guide for the Tag-it HF-I Standard Transponder IC is designed for use by TI partners who

are engineers experienced with Radio Frequency Identification Devices (RFID) and the processing of

wafers.

Regulatory, safety and warranty notices that must be followed are given in Chapter 4.

Conventions

WARNING

A WARNING IS USED WHERE CARE MUST BE TAKEN OR A

CERTAIN PROCEDURE MUST BE FOLLOWED, IN ORDER TO

PREVENT INJURY OR HARM TO YOUR HEALTH.

CAUTION

This indicates information on conditions which must be met, or a procedure

which must be followed, which if not heeded could cause permanent damage to

the equipment or software.

Note:

Indicates conditions which must be met, or procedures which must be followed, to ensure

proper functioning of the equipment or software.

Note:

Indicates information which makes usage of the equipment or software easier.

For more information, please contact the sales office or distributor nearest you. This contact information

can be found on our web site at:

http://www.ti-rfid.com.

6

SCBU047 (11-09-21-064) – October 2007

Submit Documentation Feedback