6

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

CHARGING JUMPSTARTER

CAUTIONS

1. ALWAYS use the original charger for charging. Unqualified chargers will

shorten the life of the product and may even be dangerous.

2. ALWAYS charge the unit before using for the first time (see below).

3. DO NOT charge for long periods of time unattended.

4. ALWAYS charge in a well ventilated area and on a non-flammable surface.

5. NEVER try and jump start while the device is being charged.

6. After each use, press the On/Off button. When the battery level is showing

a yellow light, the device should be charged as soon as possible. If the red

light is showing then charge immediately.

CHECKING THE JUMPSTARTER CHARGE LEVEL

1. Press the On/Off button.

• The battery status indicator light will

show either Red (25%), Yellow (75%)

or Green (100%).

CHARGING THE JUMPSTARTER

1. Charge your jumpstarter battery fully before

using it for the first time.

2. Insert the input charging adaptor into the input

charging port on the rear of the Jumpstarter.

3. Insert the charger into a mains power outlet and

switch on.

• During charging, the battery indicator light

will flash relative to the charging stage, Red

(25%), Yellow (75%), Green (100%).

• Charging will take a maximum of 6-8 hours,

depending on how much charge is still left in

the jumpstarter.