10

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

8. If ignition waiting time exceeds 3 minutes, the jumpstarter will automatically

turn itself off. Push the On/Off button or reconnect the clamps for the next

jumpstart.

RUNNING/CHARGING USB DEVICES

1. Connect a USB cable to the jumpstarters

USB charging port

2. Double click the On/Off button, which

will provide 5V/2.1A charging power.

3. Plug the appropriate connector on the

USB cable into the device that requires

charging.

NOTE: When a loading current of over

2.4A is detected, the jumpstarter

will shut down the USB charging

port.

4. Double click the On/Off button to turn

off the USB charging port. If the port is

unused for 10 seconds the jumpstarter will automatically turn the port off.

USING THE LED WORK LIGHT

1. Press and hold the On/Off button

for about 3 seconds to turn the

light on.

2. To rotate through the light working

modes, press the On/Off button

as follows:

• Turning On: 100% Brightness

• 1st Short Press: 50% Dim Light

• 2nd Short Press: Slow Flash

• 3rd Short Press: Fast Flash

• 4th Short Press: SOS

• 5th Short Press: Turn Light Off

3. After continuing to work for more than 5 seconds in any working mode,

short press the On/Off button to turn the light off.