データシートサーチシステム
  Japanese  ▼
ALLDATASHEET.JP

X  

HSF1 データシート(PDF) 18 Page - Clarke International

部品番号 HSF1
部品情報  NO GAS INVERTER MIG WELDER
PDF  28 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
メーカー  CLARKE [Clarke International]
ホームページ  https://www.clarkeinternational.com/
Logo CLARKE - Clarke International

HSF1 データシート(HTML) 18 Page - Clarke International

Back Button HSF1 Datasheet HTML 14Page - Clarke International HSF1 Datasheet HTML 15Page - Clarke International HSF1 Datasheet HTML 16Page - Clarke International HSF1 Datasheet HTML 17Page - Clarke International HSF1 Datasheet HTML 18Page - Clarke International HSF1 Datasheet HTML 19Page - Clarke International HSF1 Datasheet HTML 20Page - Clarke International HSF1 Datasheet HTML 21Page - Clarke International HSF1 Datasheet HTML 22Page - Clarke International Next Button
Zoom Inzoom in Zoom Outzoom out
 18 / 28 page
background image
18
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
WELDING ADVICE
• Try to maintain the tip of the nozzle at an angle of approx. 45o and at a constant
distance of approx 5-7mm from the workpiece.
• Try to maintain a constant speed of movement with the torch.
• DO NOT weld in windy conditions or in an area where ventilation is a problem, or
where air flow fluctuates.
• ALWAYS keep the wire and nozzle clean...NEVER use rusted wire.
• Avoid sharp bends or kinks in the welding hose.
• Whenever possible, clean out the wire liner with compressed air when replacing
the wire spool.
• Periodically remove the dust using LOW PRESSURE compressed air within the
casing. Adequate heat dissipation is essential during the welders operation.
MAINTENANCE
Frequency of maintenance operations depends on the operating conditions, how
intensively the welder is used and how clean or dirty the welding site is (aggressive
environments etc).
Always inspect the earth cable and torch hose before use, to ensure they are in
perfect condition and that the earth clamp is clean and secured correctly to the cable.
Check the hose for security and damage.
As a general rule the power supply should be inspected at least annually. Consult your
CLARKE dealer for advice if necessary.
Wire Feed Unit
The feed roller wire guide plays an important part in obtaining consistent results.
Clean the rollers weekly, especially the feed roller groove, removing all dust deposits.
WARNING: ELECTRICITY CAN KILL - NEVER TOUCH LIVE
ELECTRICAL COMPONENTS.
WARNING: DISCONNECT THE POWER SUPPLY BEFORE ALL
INSPECTIONS AND MAINTENANCE OPERATIONS. BEWARE HOT
SURFACES.
WARNING: ALWAYS LET THE WELDER COOL DOWN BEFORE
ACCESSING INTERNAL COMPONENTS.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28


データシート ダウンロード

Go To PDF Page


リンク URL



ALLDATASHEETはお客様のビジネスに役立ちますか?  [ DONATE ] 

Alldatasheetは   |   広告   |   お問い合わせ   |   プライバシーポリシー   |   データシートへのリンク    |   リンク交換   |   メーカーリスト
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com