 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
ST10F280 データシート(PDF) 155 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST10F280 データシート(HTML) 155 Page - STMicroelectronics |
|
|
155 / 186 page  ST10F280 155/186 20 - ELECTRICAL CHARACTERISTICS 20.1 - Absolute Maximum Ratings Note: 1. Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. During overload conditions (VIN > VDD or VIN < VSS) the voltage on pins with respect to ground (VSS) must not exceed the values defined by the Absolute Maximum Ratings. 20.2 - Parameter Interpretation The parameters listed in the following tables represent the characteristics of the ST10F280 and its demands on the system. Where the ST10F280 logic provides signals with their respective timing characteristics, the symbol “CC” for Controller Characteristics, is included in the “Symbol” column. Where the external system must provide signals with their respective timing characteristics to the ST10F280, the symbol “SR” for System Requirement, is included in the “Symbol” column. 20.3 - DC Characteristics VDD = 5V ± 10%, VSS = 0V, fCPU = 40MHz, Reset active, TA = -40 to +125°C Symbol Parameter Value Unit VDD Voltage on VDD pins with respect to ground 1 -0.5, +6.5 V VIO Voltage on any pin with respect to ground1 -0.5, (VDD +0.5) V VAREF Voltage on VAREF pin with respect to ground 1 -0.3, (VDD +0.3) V IOV Input Current on any pin during overload condition1 -10, +10 mA ITOV Absolute Sum of all input currents during overload condition1 |100 mA| mA Ptot Power Dissipation1 1.5 W TA Ambient Temperature under bias -40, +125 °C Tstg Storage Temperature1 -65, +150 °C Symbol Parameter Test Conditions Min. Max. Unit VIL SR Input low voltage – -0.5 0.2 VDD - 0.1 V VILS SR Input low voltage (special threshold) – -0.5 2.0 V VIH SR Input high voltage (all except RSTIN and XTAL1) – 0.2 VDD + 0.9 VDD + 0.5 V VIH1 SR Input high voltage RSTIN – 0.6 VDD VDD + 0.5 V VIH2 SR Input high voltage XTAL1 – 0.7 VDD VDD + 0.5 V VIHS SR Input high voltage (special threshold) – 0.8 VDD - 0.2 VDD + 0.5 V HYS Input Hysteresis (special threshold) 3 – 400 – mV VOL CC Output low voltage (PORT0, PORT1, Port 4, ALE, RD, WR, BHE, CLKOUT, RSTOUT) 1 IOL = 2.4mA – 0.45 V VOL1 CC Output low voltage (all other outputs) 1 IOL1 = 1.6mA – 0.45 V |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
