| データシートサーチシステム |
|
STLC5048 データシート(PDF) 1 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STLC5048 データシート(HTML) 1 Page - STMicroelectronics |
|
1 / 45 page ![]() 1/45 STLC5048 January 2003 s FULLY PROGRAMMABLE MONOLITHIC 4 CHANNEL CODEC/FILTER s SINGLE +3.3V SUPPLY s A/m LAW PROGRAMMABLE s LINEAR CODING (16 BITS) OPTION s PCM HIGHWAY FORMAT AUTOMATICALLY DETECTED:1.536 or 1.544 MHz2.048, 4.096, 8192 MHz s TWO PCM PORTS AVAILABLE s TX GAIN PROGRAMMING: 33dB RANGE; <0.01dB STEP s RX GAIN PROGRAMMING:42dB RANGE; <0.01dB STEP s PROGRAMMABLE SLIC INPUT IMPEDANCE s PROGRAMMABLE TRANSHYBRID BALANCE FILTER s PROGRAMMABLE EQUALIZATION (FREQUENCY RESPONSE) s PROGRAMMABLE TIME SLOT ASSIGNMENT s DIGITAL AND ANALOG LOOPBACKS s SLIC CONTROL PORTSTATIC (16 I/Os) DYNAMIC (12 I/Os + 4 CS) s BUILT-IN TEST MODE WITH TONE GENERATION, MCU ACCESS TO PCM DATA s 64 TQFP (10X10mm) PACKAGE s PROGRAMMABLE SLIC LINE CURRENT LIMITATION s PROGRAMMABLE SLIC OFF-HOOK DETECTION THRESHOLD DESCRIPTION The STLC5048 is a monolithic fully programmable 4 channel CODEC and filter. It operates with a single +3.3V supply. The analog interface is based on a receive output buffer driving the SLIC RX input and on an amplifier input stage normally driven by the SLIC TX output. Due to the single supply voltage a midsupply refer- ence level is generated internally by the device and all analog signals are referred to this level (AGND). The PCM interface uses one common 8KHz frame sync. pulse for transmit and receive direction. The bit clock is automatically detected between four stan- dards: 1.563/1.544MHz, 2.048MHz, 4.096MHz, 8192MHz. Two PCM port are provided: the channels can be connected to port A or/and B. Device programmability is achieved by means of several registers and commands allowing to set the different parameters like TX/RX gains, line imped- ance, transhybrid balance, equalization (frequency response), encoding law (A/ µ), time slot assignment, independent channels power up/down, loopbacks, PCM bits offset. The STLC5048 can be programmed via serial inter- face running up to 8 MHz. One interrupt output pin is also provided. A GUI interface is also available to emulate and pro- gram the coefficients for impedance synthesis, echo cancelling and channel filtering. TQFP64 (10x10mm) ORDERING NUMBER: STLC5048 FULLY PROGRAMMABLE FOUR CHANNEL CODEC AND FILTER |
同様の部品番号 - STLC5048 |
|
同様の説明 - STLC5048 |
|
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |