TDF8553J datasheet(39/47 Pages) NXP

部品番号	TDF8553J

部品情報	I2C-bus controlled 4 X 50 Watt power amplifier and multiple voltage regulator

PDF	47 Pages

Scroll/Zoom	100%

メーカー	NXP [NXP Semiconductors]

ホームページ	http://www.nxp.com

Logo

39 / 47 page

TDF8553J_1

Objective data sheet

Rev. 01 — 3 December 2008

39 of 47

NXP Semiconductors

TDF8553J

× 50 Watt power ampliﬁer and multiple voltage regulator

12.1 Supply decoupling

See Figure 26.

The high frequency 220 nF decoupling capacitors connected to power supply voltage

pins 6 and 20 should be located as close as possible to these pins.

It is important to use good quality capacitors. These capacitors should be able to

suppress high voltage peaks that can occur on the power supply if several audio channels

are accidentally shorted to the power supply simultaneously, due to the activation of

current protection. Good results have been achieved using 0805 case-size capacitors

(X7R material, 220 nF) located close to power supply voltage pins 6 and 20.

If a DC-to-DC converter is used to supply regulator 3, the recommendations of the

converter manufacturer relating to decoupling must be followed.

Fig 27. Printed-circuit board layout of test and application circuit showing top copper layer viewed from top

001aai763

TDF8553J データシート(PDF) 39 Page - NXP Semiconductors