This document is the property of EM MICROELECTRONIC-MARIN SA and is furnished in confidence and upon the condition that all

rights originating in the information, whether patented or not, will be respected.

EM Document Center/04.08 - Page 8 of 17

3.2

PACKING RELIABILITY

The internal and external packaging has to be released and qualified by following tests:

Condition

Test

Acceptable results

Take one external box

filled with the required

inner boxes completed

with LCD products

Drop the external box from 0.8m

on concrete:

-

6 side

-

8 corners

1) No mechanical & appearance

damage on the finished product.

2) No product out of their original

position.

Take 5 empty trays

70°C 96 hours

-20°C 96 hours

No deformation of trays

Damp heat with load

20-40°C, 80-90% HR, 168h,

2 stacked full boxes

No damage to internal products

and no major deformation of the

trays

4.

MARKINGS

Each modules is individually labelled with following instructions :

- TAT07_Rx (x: current revision 0, 1, 2, etc - see §2.1)

- Lot number : Y.WW.SS (Year.Week.Serial number)

For label size and location refer to mechanical drawing (§2.7)

5.

SHIPMENT METHOD

5.1

INTERNAL PACKAGING

The products are packaged on ESD safe trays (see tray drawing in Appendix 1), to protect them from

touching each other.

Tray dimension is 33.5 x 33.5mm, each tray containing? pcs. Maximum stacking height for sub

packages shall be limited to 10 trays + 1 cover tray.

Following information is contained on the label of each subpackage:

1. Lot number

2. P.N. (TAT07_Rx) (see §2.1)

3. Customer P.N. (see §2.1)

4. Quantity of pcs

6.

RECEIVING INSPECTION

Receiving inspection at customer site has to be done within 1 month after receipt of the goods. Any products

that do not conform to product and delivery specification are dealt with in accordance with item « dealing with

customer complaints » in EM General Terms of Sales (see EM website)

7.

QUALITY ASSURANCE

Also refer to EM General Terms of Sales and EM Web Site

7.1

CONFORMITY

The performance, functions and reliability of the shipped products conform to the EM product

specifications.

7.2

RESPONSIBILITY

Customer is responsible for any defects in quality caused after receiving inspection.