CS49326 datasheet(21/90 Pages) CIRRUS

21 / 90 page

CS49300 Family DSP

DS339F7

1.14. Switching Characteristics — Parallel Data Input

(VA, VD[3:1] = 2.5 V

±5%; Inputs: Logic 0 = DGND, Logic 1 = VD, CL = 20 pF)

Notes: 1. CMPREQ signal is asynchronous to CLKIN and can change at any time relative to CLKIN.

2. Certain timing parameters are normalized to the DSP clock, DCLK, in nanoseconds. The DSP clock can

be defined as follows:

External CLKIN Mode:

DCLK == CLKIN/4 before and during boot

DCLK == CLKIN after boot

Internal Clock Mode:

DCLK == 10MHz before and during boot, i.e. DCLK == 100ns

DCLK == 65 MHz after boot, i.e. DCLK == 15.4ns

It should be noted that DCLK for the internal clock mode is application specific. The application code

users guide should be checked to confirm DCLK for the particular application.

Parameter

Symbol

Min

Max

Unit

CMPCLK Period

Tcmpclk

4*DCLK + 10

DATA[7:0] setup before CMPCLK high

Tcmpsu

DATA[7:0] hold after CMPCLK high

Tcmphld

Delay from falling edge of CMPREQ to CMPCLK rising edge

Treqclk

Tcmpsu

Tcmpclk

Tcmphld

CMPREQ

CMPCLK

DATA[7:0]

Treqclk

Figure 11. Parallel Data Timing (when not in a parallel control mode)

CS49326 データシート(PDF) 21 Page - Cirrus Logic

CS49326 データシート(HTML) 21 Page - Cirrus Logic

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90

データシートダウンロード