| データシートサーチシステム |
|
804-R010-330 データシート(PDF) 14 Page - Magnetrol International, Inc. |
|
|
|||||||||||||||||||||||||||||
804-R010-330 データシート(HTML) 14 Page - Magnetrol International, Inc. |
|
14 / 32 page ![]() 50-604 Kotron Model 804 Sentinel II RF Level Transmitter 11 2.4.2.4 Manual self-test A manual self-test can be performed on the 804 electron- ics. A remote contact should be wired across terminals 1 and 2 with terminal 3 used for shield if needed. Performing a manual self-test will cause the 804 to go into alarm mode. The relays and mA output will change to the mode selected in the Unit Configuration. 2.5 Unit Configuration 2.5.1 General Configuration Instructions The Kotron Sentinel II RF Capacitance Level Transmitter contains a microprocessor-based operator interface, which allows easy configuration of level measurement or control applications. These simple-to-use features are accessed through the 16-digit keypad, located on the front of the unit’s shield. The operator interface and instructions for the unit config- uration are broken down into five main groups of menus: MEASURED VALUES: For viewing the measured values SYSTEM CONFIG : Probe calibration I/O CONFIG : Configure the input/output functions (such as 4–20 mA and relays) ADV CONFIG: Set the unit’s advanced features (such as password and display options) DIAGNOSTICS : Enhanced troubleshooting features. 2.5.2 Password The Sentinel II has a built-in password system to restrict access to portions of the menu that affect the unit’s opera- tion. The password is required whenever programming values are being changed. The password can be changed to any four digit number desired. This procedure is described under the ADV CONFIG menu page 13. Caution: The Sentinel II is shipped from the factory with the pass- word 0804. If the programmed password is misplaced or forgotten, consult the factory for assistance. 2.5.3 Operator Keypad All unit configuration instructions in this manual will show the local transmitter display exactly as it will appear to the operator. The operator interface is via a keypad consisting of the following keys: |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |