DL4 datasheet(9/76 Pages) ITT

9 / 76 page

Dimensions are shown in mm (inch)

Dimensions subject to change

ZIF Connectors

DL/DLM

DL/DLM Product Features

High pin count:

60, 96, 156, 260, 360, 624, 1248* or 2496*

contact positions.

Variety of contacts:

– Crimp

– Square Post

– Wrap Post

– Buss

– PC/RC

Metal or plastic housing.

Wide range of accessories.

Easy actuation by screwdriver, socket wrench

(DL1/2/3 only), allen wrench or actuating

handle (see accessories page 47).

The long life and rapid mating are achieved through

the use of our Zero Insertion Force design.

Contacts in the plug and receptacle do not touch

each other while the connector halves are being

engaged.

Zero Insertion Force Camming Instructions

This is our ‘‘DL/DLM’’ series of connectors.

Step 1. Simply place it together.

Step 2. Turn the cam a quarter turn.

Step 3. It’s locked and mated.

Contacts aligned.

Contacts engaged.

Contacts are mated.

It’s as easy as 1, 2, 3...

Step 1. The plug is placed over the receptacle.

Step 2. A ‘‘quarter turn’’ of an actuating shaft

mates all the contacts at once.

Step 3. The ‘‘same quarter’’ turn also physically

locks the connector halves together.

Connector engagement force is zero, and the only

wear on the contacts occurs as they are pressed

together and lightly wiped past each other during

the camming and locking operation.

* Contact Cannon for details.

DL4 データシート(PDF) 9 Page - ITT Industries

DL4 データシート(HTML) 9 Page - ITT Industries

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76

データシートダウンロード