Long-life grade capacitors

Applications

Frequency converters

Solar inverters

Uninterruptible power supplies

Professional power supplies

Medical appliances

Telecommunications

Features

Outstanding ripple current capability

Base cooling available upon request for case sizes

30

× 35 mm to 35 × 55 mm

Long useful life

Very high CV product, compact

High reliability

Extremely improved performance at high frequencies

Outstanding low ESR at operating conditions above 50

°C

Optimized internal thermal resistance

Different case sizes available for each capacitance value

Capacitors with all insulation versions pass the needle flame

test according to IEC 60695-11-5 for all flame exposure times

up to 120 s

RoHS-compatible

Construction

Charge/discharge-proof, polar

Aluminum case, fully insulated with PVC

Version with PET insulation available

Version with additional PET insulation cap on terminal side

available for insulating the capacitor from the PCB

Snap-in solder pins to hold component in place on PC-board

Minus pole marking on case surface

Minus pole not insulated from case

Overload protection by safety vent on the case wall

Terminals

Standard version with 2 terminals,

2 lengths available: 6.3 and 4.5 mm

3 terminals to ensure correct insertion: length 4.5 mm

Snap-in capacitors

B43545

Outstanding ripple current, compact

105

°C

Page 2 of 17

Please read Cautions and warnings and

Important notes at the end of this document.