 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
MCP2030 データシート(PDF) 6 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MCP2030 データシート(HTML) 6 Page - Microchip Technology |
|
|
6 / 66 page  MCP2030 DS21981B-page 6 2005-2013 Microchip Technology Inc. RSSI current output IRSSI — 6 — 0.65 12 100 2 20.3 — A A A VIN = 37 mVPP VIN = 370 mVPP VDD = 3.0V, VIN = 0 to 4 VPP Linearly increases with input signal ampli- tude. Tested at VIN = 37 mVPP, 100 mVPP, and 370 mVPP at +25ºC. RSSI current linearity ILRRSSI -15 — 15 % Tested at room temperature only (see Equation 5-1 and Figure 5-7 for test method). AC Characteristics (Continued) Electrical Specifications: Standard Operating Conditions (unless otherwise stated) Supply Voltage 2.0V V DD 3.6V Operating temperature -40°C T A +85°C LCCOM connected to VSS LC Signal Input Sinusoidal 300 mVPP Carrier Frequency 125 kHz LCCOM connected to VSS Parameters Sym. Min. Typ† Max. Units Conditions * Parameter is characterized but not tested. † Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are not tested. Note 1: Required output enable filter high time must account for input path analog delays (= TOEH - TDR + TDF). 2: Required output enable filter low time must account for input path analog delays (= TOEL + TDR - TDF). SPI Timing Electrical Specifications: Standard Operating Conditions (unless otherwise stated) Supply Voltage 2.0V V DD 3.6V Operating temperature -40°C T A +85°C LC Signal Input Sinusoidal 300 mVPP Carrier Frequency 125 kHz LCCOM connected to VSS Parameters Sym. Min. Typ† Max. Units Conditions SCLK Frequency FSCLK —— 3 MHz CS fall to first SCLK edge setup time TCSSC 100 — — ns SDI setup time TSU 30 — — ns SDI hold time THD 50 — — ns SCLK high time THI 150 — — ns SCLK low time TLO 150 — — ns SDO setup time TDO —— 150 ns SCLK last edge to CS rise setup time TSCCS 100 — — ns CS high time TCSH 500 — — ns CS rise to SCLK edge setup time TCS1 50 — — ns SCLK edge to CS fall setup time TCS0 50 — — ns SCLK edge when CS is high Rise time of SPI data (SPI Read command) TRSPI —10 — ns VDD 3.0V. Time is measured from 10% to 90% of amplitude Fall time of SPI data (SPI Read command) TFSPI —10 — ns VDD 3.0V. Time is measured from 90% to 10% of amplitude † Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are not tested. |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
