MCP2030_13 datasheet(1/66 Pages) MICROCHIP

部品番号	MCP2030

部品情報	Three-Channel Analog Front-End Device

PDF	66 Pages

Scroll/Zoom	100%

メーカー	MICROCHIP [Microchip Technology]

ホームページ	http://www.microchip.com

Logo

1 / 66 page

 2005-2013 Microchip Technology Inc.

DS21981B-page 1

MCP2030

Device Features:

• Three input pins for analog input signals

• High input detection sensitivity (3 mVPP, typical)

• High modulation depth sensitivity (as low as 8%)

• Three output selections:

- Demodulated data

- Carrier clock

- RSSI

• Input carrier frequency: 125 kHz, typical

• Input data rate: 10 Kbps, maximum

• 8 internal Configuration registers

• Bidirectional transponder communication

(LF talk back)

• Programmable antenna tuning capacitance

(up to 63 pF, 1 pF/step)

• Programmable output enable filter

• Low standby current: 4

A (with 3 channels

enabled), typical

• Low operating current: 13

A (with 3 channels

enabled), typical

• Serial Peripheral Interface (SPI™) with external

devices

• Supports Battery Back-Up mode and batteryless

operation with external circuits

• Industrial and Extended Temperature Range:

-40°C to +85°C (industrial)

Typical Applications:

• Automotive industry applications:

- Passive Keyless Entry (PKE) transponder

- Remote door locks and gate openers

- Engine immobilizer

- LF initiator sensor for tire pressure monitoring

systems

• Security Industry applications:

- Long range access control transponder

- Parking lot entry transponder

- Hands-free apartment door access

- Asset control and management

Description:

The MCP2030 is a stand-alone Analog Front-End

(AFE) device for Low-Frequency (LF) sensing and bidi-

rectional communication applications. The device has

eight

internal

Configuration

registers

which

are

readable and programmable, except the read-only

STATUS register, by an external device.

The device has three low-frequency input channels.

Each input channel can be individually enabled or dis-

abled. The device can detect an input signal with ampli-

tude as low as ~1 mVPP and can demodulate an

amplitude-modulated input signal with as low as 8%

modulation depth. The device can also transmit data by

clamping and unclamping the input LC antenna

voltage.

The device can output demodulated data, carrier clock

or RSSI current depending on the register setting. The

demodulated data and carrier clock outputs are avail-

able on the LFDATA pin, while the RSSI output is avail-

able on the RSSI pin. The RSSI current output is

linearly proportional to the input signal strength.

The device has programmable internal tuning capaci-

tors for each input channel. The user can program

these capacitors up to 63 pF, 1 pF per step. These

internal tuning capacitors can be used effectively for

fine-tuning of the external LC resonant circuit.

The device is optimized for very low current consump-

tion and has various battery-saving low-power modes

(Sleep, Standby, Active). The device can also be oper-

ated in Battery Back-up and Batteryless modes using a

few external components.

This device is available in 14-pin PDIP, SOIC, and

TSSOP packages. This device is also used as the AFE

in the PIC16F639.

Package Types:

1

2

3

4

5

6

7

14

13

12

9

11

10

8

NC

LCCOM

LCX

VSS

LFDATA/

VDD

LCZ

LCY

VSS

CS

SCLK/ALERT

RSSI

NC

VDD

CCLK/SDIO

MCP2030

PDIP, SOIC, TSSOP

Three-Channel Analog Front-End Device

同様の部品番号 - MCP2030_13

メーカー	部品番号	データシート	部品情報
Microchip Technology	MCP2030-I/P	1Mb / 66P	Three-Channel Analog Front-End Device 2005
	MCP2030-I/SL	1Mb / 66P	Three-Channel Analog Front-End Device 2005
	MCP2030-I/ST	1Mb / 66P	Three-Channel Analog Front-End Device 2005
	MCP2030A	1Mb / 74P	Three-Channel Analog Front-End Devicewith 1 mVPP Input Detection Sensitivity 2011
	MCP2030A-I	1Mb / 66P	Three-Channel Analog Front-End Device 08/24/05

More results

同様の説明 - MCP2030_13

メーカー	部品番号	データシート	部品情報
STMicroelectronics	TDA7521	95Kb / 11P	Analog Front End May-1998
Microchip Technology	MCP2030	1Mb / 66P	Three-Channel Analog Front-End Device 2005
	MCP2036	669Kb / 30P	Inductive Sensor Analog Front End Device 2009
	MCP3901	1Mb / 60P	Two Channel Analog Front End 2009
	MCP3901	1Mb / 60P	Two-Channel Analog Front End 2010
	MCP2030A-I	1Mb / 66P	Three-Channel Analog Front-End Device 08/24/05
	MCP2035	1Mb / 68P	Analog Front-End Device for BodyCom Applications 11/29/11
	MCP3919	5Mb / 88P	3V Three-Channel Analog Front End 03/25/14
DATEL, Inc.	ADCDS-1603LEX-C	110Kb / 1P	Analog Front End
DATEL, Inc.	ADCDS-1801LC-C	138Kb / 1P	Analog Front End