CAUTION: It is advised that normal static precautions be taken in handling and assembly

of this component to prevent damage and/or degradation which may be induced by ESD

Figure 2. Package outline drawing

Section A-A

4.10

0.161

0.36

0.014

1.69

0.067

2.83

0.111

4.05

0.159

A

A

Optical center

Protective

kapton tape

VCSEL hole

Sensor hole

3.18

0.125

2X

0.50

0.020

0.89

0.035

1.78

0.070

2X 0.50

0.020

0.78

0.031

1.52

0.060

5.05

0.199

10.10

0.398

16X 0.50

0.020

16.20

0.638

10.90

(At shoulder)

0.429

9.10

0.358

10.90

0.429

0.20

0.008

0.50

0.020

2.41

0.095

3.96

0.156

Feature For

Illustration Only

Pin 1

9.10

0.358

Notes:

1. Dimensions in milimeter / inches.

2. Dimensional tolerance:

3. Coplanarity of lead: 0.1mm

4. Lead pitch tolerance:

5. Non-cumulative pitch tolerance:

6. Maximum flash:

7. Angular tolerance: 3

8. Chamfer (25 x2) on the taper side of the lead.

9. Brackets () indicate reference dimension.

10. Document Number: LSR_INT_16A_Pkg_001

PixArt Imaging Inc.

ADNS-7530 Integrated Molded Lead-Frame DIP Sensor

All rights strictly reserved any portion in this paper shall not be reproduced, copied or transformed to any other forms without permission.

PixArt Imaging Inc.

3