80C32EBAA datasheet(54/62 Pages) PHILIPS

54 / 62 page

Philips Semiconductors

Product specification

80C52/80C54/80C58

CMOS single-chip 8-bit microcontrollers

1996 Aug 16

VCC–0.5

0.45V

0.2VCC+0.9

0.2VCC–0.1

NOTE:

AC inputs during testing are driven at VCC –0.5 for a logic ‘1’ and 0.45V for a logic ‘0’.

Timing measurements are made at VIH min for a logic ‘1’ and VIL max for a logic ‘0’.

SU00717

Figure 18. AC Testing Input/Output

VLOAD

VLOAD+0.1V

VLOAD–0.1V

VOH–0.1V

VOL+0.1V

NOTE:

TIMING

REFERENCE

POINTS

For timing purposes, a port is no longer floating when a 100mV change from

load voltage occurs, and begins to float when a 100mV change from the loaded

VOH/VOL level occurs. IOH/IOL ≥ ±20mA.

SU00718

Figure 19. Float Waveform

SU00768

TYP ACTIVE MODE

MAX IDLE MODE

TYP IDLE MODE

MAX ACTIVE MODE

ICCMAX = 0.9 X FREQ. + 1.1

4MHz

8MHz

12MHz 16MHz

FREQ AT XTAL1

ICC

20MHz

24MHz 28MHz 32MHz 36MHz

Figure 20. ICC vs. FREQ

Valid only within frequency specifications of the device under test

80C32EBAA データシート(PDF) 54 Page - NXP Semiconductors

80C32EBAA データシート(HTML) 54 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62

データシートダウンロード