UM1539 datasheet(23/46 Pages) STMICROELECTRONICS

部品番号	UM1539

部品情報	STEVAL-IFS017V1 multi device temperature sensor and RTC demo

PDF	46 Pages

Scroll/Zoom	100%

メーカー	STMICROELECTRONICS [STMicroelectronics]

ホームページ	http://www.st.com

Logo

23 / 46 page

UM1539

Getting started

Doc ID 023106 Rev 1

23/46

1.2.18

GUI window for M41T82SM6 RTC

M41T82 RTC is available in SO8 package and is mounted on a separate daughter card.

The steps for selecting the M41T82 RTC are as follows:

Select the supply for the RTC daughter card using jumper CN5 and CN6 on the

motherboard. Refer to Section 1.2.3.

Plug in the M41T82 RTC daughter card on the motherboard (take note of the notch on

the daughter card connector for mounting).

Power up the motherboard using the USB cable.

Open the GUI and select the RTC selection icon, as shown in Figure 15.

Select M41T82 RTC from the menu and press OK.

The M41T82 RTC window opens, as shown in Figure 16.

On powering up the board, the RTC clock is seen as halted showing the time on which

external power was removed from the RTC. The clock starts running only after resetting

the HT bit in the RTC GUI window.

Figure 16.

GUI Window for M41T82 RTC

UM1539 データシート(PDF) 23 Page - STMicroelectronics