MPXM2010GS datasheet(31/670 Pages) MOTOROLA

31 / 670 page

1–25

Motorola Sensor Device Data

www.motorola.com/semiconductors

MEDIA TEST METHODS

Figures 11 and 12 show a test apparatus specifically intended

for use with solvents and Figure 13 an apparatus for aqueous

solutions. This test system has resulted in a realistic test

environment that provides electrical bias,

in situ measurements,

consistent stoichiometry, and temperature control all within a

safe environment. The safety aspects of the testing were

obtained by creating an environment free of oxygen to eliminate

the possibility of a fire. Results from the testing have included

swelling of silicone materials, corrosion, and adhesive failures.

Figure 11. Graphical depiction of the sensor media tester used for liquid or vapor exposure of the device to the

harsh media to accelerate the failure mechanisms or demonstrate compatibility.

CONDENSER COILS

SENSORS

TO AUTOMATIC TEST SYSTEM

LOADING CHAMBER

THERMOCOUPLES

FLUORINATED

HYDROCARBON

LIQUID WITH

EXTERNAL

HEATER

MODULAR TEST

PLATE WITH

O–RING SEAL

TO DRAIN

TO PUMP

FROM PUMP

TANK

LID

ELECTRICAL

CONNECTIONS

WITH VOLTAGE AND CURRENT

LINKING PROTECTION

POROUS NITROGEN

PURGE LINES

Figure 12. Photograph of the load chamber area of the Media Test System allowing for fuel or solvent testing at

temperature with

in situ monitoring of the devices under test (DUT’s) output.

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

MPXM2010GS データシート(PDF) 31 Page - Motorola, Inc

MPXM2010GS データシート(HTML) 31 Page - Motorola, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

データシートダウンロード