CP10.241, CP10.241-C1, CP10.241-S1,

CP10.241-S2, CP10.242

CP-Series

Aug. 2017 / Rev. 1.4a DS-CP10.241-EN

All values are typical at 24V, 10A, 230Vac, 50Hz, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.

www.pulspower.com Phone +49 89 9278 0

Germany

This bracket is used to mount the devices on a wall/panel without utilizing a DIN-Rail. It is suitable for the CP10.241,

CP10.241-C1, CP10.241-S1 , CP10.241-S2 and CP10.242.

The bracket can be mounted without detaching the DIN-rail brackets.

Fig. 23-1 Isometric view

(Picture shows the CP10.241)

Fig. 23-2 Isometric view-

(Picture shows the CP10.241)

Fig. 23-3 Isometric view

(Picture shows the CP10.241)

Fig. 23-4 Wall/panel mounting,

front view

(Picture shows the CP10.241)

Fig. 23-5 Hole pattern for wall

mounting

Fig. 23-6 Wall/panel mounting,

side view

(Picture shows the CP10.241)

21/30