L-18

Switch mode Power Supply

S82K

When Using

± Output Models

The +V output detects the total output power (+V output and -V output) to trigger the short-circuit protection against overcurrent. This protection

varies depending on the -V output state. The -V output independently triggers the short-circuit protection.

I Overvoltage Protection (S82K-24024T Models Only)

The Power Supply is provided with an overvoltage protection function that protects the load and the Power Supply from possible damage by over-

voltage. When the output voltage rises above a set value, the protection function is triggered, shutting off the output voltage. If this occurs, reset

the Power Supply by turning it off for 1 minute min. and then turning it on again.

I Inrush Current, Startup Time, Hold Time

50

0

100

Output current (%)

Intermittent

operation

Output current (%)

Rated voltage

3-/7.5-/15-/90-/100-/240-W Models

30-/50-W Models

Rated voltage

Note: Do not short-circuit the output terminals of the S82K or use the S82K with excessive output current for a long time, otherwise the

internal circuitry of the S82K may be deteriorated or damaged.

10%

−10%

Variable range

Rated output

voltage

Overvoltage

protection

operating

90%

96.5%

Input ON

AC input voltage

AC input current

Output voltage

Inrush current on input application

Input OFF

Startup time: 100 to 1000 ms

max. depending on the model.

Hold time

(20 ms min.)