NTP53X2 datasheet(1/133 Pages) NXP

部品番号	NTP53X2

部品情報	NTAG 5 link - NFC Forum-compliant I2C bridge

PDF	133 Pages

Scroll/Zoom	100%

メーカー	NXP [NXP Semiconductors]

ホームページ	http://www.nxp.com

Logo

1 / 133 page

NTP53x2

NTAG 5 link - NFC Forum-compliant I2C bridge

Rev. 3.3 — 3 July 2020

Product data sheet

544533

COMPANY PUBLIC

1 General description

Optimized for sensor-driven applications, this highly integrated NFC IC creates a secure,

standard-based link from the device to the cloud, in a future proof way to address and

even power sensors.

NTAG 5 link is available in two different variants (see Section 4). NTP5332 supports all

features of NTP5312, and on top of these, it offers also I2C master features, as well as

AES mutual authentication.

NXP's NTAG 5 link lets designers of sensor-equipped systems add an NFC interface

with a wired host interface that’s configurable as an I2C master/slave, a pulse width

modulator (PWM), or a general-purpose I/O (GPIO). Operating at 13.56 MHz, it is an

NFC Forum-compliant Type 5 Tag (customer development board is NFC Forum certified

- Certification ID: 58626) that can be read and written by an NFC-enabled device at close

range and by an ISO/IEC 15693-enabled industrial reader over a longer range.

aaa-034224

SRAM

EEPROM

TRANSPARENT I2C MASTER CHANNEL

energy harvesting

energy

data

event detection

1

l2C

1

0

energy

data

e.g

T SENSOR

MCU

Figure 1. NTAG 5 link overview

The NTAG 5 link can act as a direct bridge between an NFC-enabled device and any I2C

slave, such as a sensor or external memory. This is especially useful in environments

that require zero-power, single-shot measurements.

With NTAG 5 link, the device can connect to the cloud with a single tap. The connection

uses an NFC Forum-compliant data exchange mechanism involving SRAM to ensure

highly interoperable data transfers.

Support for ISO/IEC 15693 lets the NTAG 5 link communicate securely in two ways: with

powerful industrial readers, at a range of up to 60 cm and with NFC-enabled devices

in proximity range. This duality makes it possible for the device to be calibrated and

parameterized automatically while in the factory and then, when put to be used in the

field, safely communicate with contactless devices such as mobile phones.

NTAG 5 link offers 2048 bytes (16384 bits) bytes of memory which can be divided

into three areas, and each area can use a different protection level, varying from no

同様の部品番号 - NTP53X2

メーカー	部品番号	データシート	部品情報
NXP Semiconductors	NTP5210	868Kb / 89P	NTAG 5 switch - NFC Forum-compliant PWM and GPIO bridge Rev. 3.3 ??3 July 2020
	NTP52101G0FUAV	868Kb / 89P	NTAG 5 switch - NFC Forum-compliant PWM and GPIO bridge Rev. 3.3 ??3 July 2020
	NTP52101G0JHKZ	868Kb / 89P	NTAG 5 switch - NFC Forum-compliant PWM and GPIO bridge Rev. 3.3 ??3 July 2020
	NTP52101G0JTTZ	868Kb / 89P	NTAG 5 switch - NFC Forum-compliant PWM and GPIO bridge Rev. 3.3 ??3 July 2020
	NTP52101G0JTZ	868Kb / 89P	NTAG 5 switch - NFC Forum-compliant PWM and GPIO bridge Rev. 3.3 ??3 July 2020

More results

同様の説明 - NTP53X2

メーカー	部品番号	データシート	部品情報
ams AG	AS3955	1Mb / 111P	NFC Forum Compliant Dynamic Tag
NXP Semiconductors	NT3H2111W0FTTJ	2Mb / 77P	NTAG I2C plus, NFC Forum Type 2 Tag compliant IC with I2C interface Rev. 3.0-3 February 2016
NXP Semiconductors	NT3H2211W0FHKH	2Mb / 77P	NTAG I2C plus, NFC Forum Type 2 Tag compliant IC with I2C interface Rev. 3.0-3 February 2016
ams AG	AS3956	1Mb / 109P	NFC Forum Compliant Dynamic Tag
	AS3955	1Mb / 102P	NFC Forum Compliant Dynamic Tag 2016-Feb-03
	AS3956	1Mb / 107P	NFC Forum Compliant Dynamic Tag 2018-Nov-14
NXP Semiconductors	NCX3310	1Mb / 2P	NFC Forum-compliant Tag IC with I2C for Automotive REV 1
	NTA5332	1Mb / 133P	NTAG 5 boost - NFC Forum-compliant I2C bridge for tiny devices Rev. 3.3 ??3 July 2020
	NTP5210	868Kb / 89P	NTAG 5 switch - NFC Forum-compliant PWM and GPIO bridge Rev. 3.3 ??3 July 2020
	NT3H2111_2211	866Kb / 84P	NTAG I2C plus: NFC Forum T2T with I2C interface, password protection and energy harvesting Rev. 3.6 - 21 July 2023