 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
AD9986 データシート(PDF) 9 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
AD9986 データシート(HTML) 9 Page - Analog Devices |
|
|
9 / 37 page  Data Sheet AD9986 SPECIFICATIONS analog.com Rev. 0 | 9 of 37 NCO FREQUENCY SPECIFICATIONS For the minimum and maximum values, TJ = −40°C to +120°C and ±5% of nominal supply, unless otherwise noted. Table 9. Parameter Test Conditions/Comments Min Typ Max Unit MAXIMUM NUMERICALLY CONTROLLED OSCILLATOR (NCO) CLOCK RATE Fine Digital Up Converter (FDUC) NCO 1.5 GHz Course Digital Up Converter (CDUC) NCO 12 GHz Fine Digital Down Converter (FDDC) NCO 1.5 GHz Course Digital Down Converter (CDDC) NCO 6 GHz MAXIMUM NCO SHIFT FREQUENCY RANGE FDUC NCO Channel interpolation rate must be > 1× −750 +750 MHz CDUC NCO fDAC = 12 GHz, main interpolation rate must be > 1× −6 +6 GHz FDDC NCO Channel decimation rate must be > 1× −750 +750 MHz CDDC NCO fADC = 6 GHz, main decimation rate must be > 1× −3 +3 GHz MAXIMUM FREQUENCY SPACING BETWEEN CHANNELIZER CHANNELS Transmitter FDUC Channels Maximum FDUC NCO clock rate × 0.81 1200 MHz Receiver FDDC Channels Maximum FDDC NCO clock rate × 0.8142 1221 MHz 1 The 0.8 factor is because the total complex pass band of the first interpolation filter is 80% of the filter input data rate. 2 The 0.814 factor is because the total complex pass band of the decimation filter is 81.4% of the filter output data rate. JESD204B AND JESD204C INTERFACE ELECTRICAL AND SPEED SPECIFICATIONS Nominal supplies. For the minimum and maximum values, TJ = −40°C to +120°C and ±5% of nominal supply, and for the typical values, TA = 25°C, which corresponds to TJ = 80°C, unless otherwise noted. Table 10. Serial Interface Rate Specifications Parameter Test Conditions/Comments Min Typ Max Unit JESD204B SERIAL INTERFACE RATE Serial lane rate (bit repeat option disabled) 1.0 15.5 Gbps Unit Interval 64.5 1000.0 ps JESD204C SERIAL INTERFACE RATE Serial lane rate (bit repeat option disabled) 6.0 24.75 Gbps Unit Interval 40.4 166.67 ps Table 11. JESD204 Receiver Electrical Specifications Parameter Test Conditions/Comments Min Typ Max Unit JESD204B/C DATA INPUTS SERDINx±, where x = 0 to 7 Standards Compliance JESD204B and JESD204C Differential Voltage, RVDIFF 800 mV p-p Differential Impedance, ZRDIFF At dc 98 Ω Termination Voltage, VTT AC-coupled 0.97 V SYNCxOUTB± OUTPUTS1 Where x = 0 or 1 Output Differential Voltage, VOD Driving 100 Ω differential load 400 mV Output Offset Voltage, VOS DVDD1P8/2 + 0.2 V SYNCxOUTB+ OUTPUT CMOS output option Refer to the CMOS Pin Specifications section 1 IEEE 1596.3 standard LVDS compatible. |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
