| データシートサーチシステム |
|
ADA4254ARUZ-R7 データシート(PDF) 9 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
ADA4254ARUZ-R7 データシート(HTML) 9 Page - Analog Devices |
|
9 / 59 page ![]() Data Sheet ADA4254 Rev. B | Page 9 of 59 ABSOLUTE MAXIMUM RATINGS Table 3. Parameter Rating VDDH VSSH – 0.3 V to VSSH + 60 V AVDD AVSS – 0.3 V to AVSS + 5.5 V DVDD DVSS – 0.3 V to DVSS + 5.5 V AVSS or DVSS VSSH – 0.3 V to VSSH + 30 V Voltage VDDH – 30 V to VDDH + 0.3 V Current ±10 mA Input Voltage (+IN1, −IN1, +IN2, or −IN2) VSSH − 60 V to VSSH + 60 V Differential Input Voltage Between Any Two Amplifier Inputs (+IN1, −IN1, +IN2, or −IN2) 60 V −OUT, +OUT Short-Circuit Current Indefinite VOCM Voltage AVSS – 0.3 V to AVDD + 0.3 V Current ±10 mA Digital Inputs/Outputs (SPI and GPIO), Voltage DVSS – 0.3 V to DVDD + 0.3 V Digital Inputs (SPI and GPIO), Current ±10 mA IOUT_LV Voltage AVSS – 0.3 V to AVDD + 0.3 V Current ±10 mA IOUT_HV Voltage VSSH – 0.3 V to VDDH + 0.3 V Current ±10 mA Operating Temperature Range −40°C to +125°C Specified Temperature Range −40°C to +105°C Maximum Junction Temperature +150°C Storage Temperature Range −65°C to +150°C Stresses at or above those listed under Absolute Maximum Ratings may cause permanent damage to the product. This is a stress rating only; functional operation of the product at these or any other conditions above those indicated in the operational section of this specification is not implied. Operation beyond the maximum operating conditions for extended periods may affect product reliability. THERMAL RESISTANCE Thermal performance is directly linked to printed circuit board (PCB) design and operating environment. Careful attention to PCB thermal design is required. θJA is the natural convection, junction to ambient, thermal resistance measured in a one cubic foot sealed enclosure. θJC is the junction to case thermal resistance. Table 4. Thermal Resistance Package Type1 θJA θJC Unit CP-28-10 36.9 1.9 °C/W RU-24 64.8 14.11 °C/W 1 The thermal resistance values specified in Table 4 are simulated based on JEDEC specifications (unless specified otherwise) and must be used in compliance with JESD51-12. Refer to the ESD Map section for a schematic of ESD diodes and paths. ESD CAUTION |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |