L9945TR datasheet(64/151 Pages) STMICROELECTRONICS

64 / 151 page

COMMAND 7

Frame partitioning

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10

OC_CONFIG_07

Description

OUT7 configuration, H-Bridge 2 current limitation enable and active freewheeling

[31:28] C: Command 7

0111

[27] R/W: Bit to read/write configuration

0: Write & request read

1: Request read only

[26] HB2_ILIM_EN: H-bridge2 current limit activation. CH7 OC threshold is used for current limitation, only valid with Shunt

measurement

0: Current limitation not active

1: Current limitation active

[25] HB2_AFW: H-bridge2 active freewheel configuration on LS

0: Passive freewheeling

1: Active freewheeling

[24] FIXED_PATTERN

[23:22] TDIAG_CONFIG_07: OFF state diagnostic blanking/filter timer for output 07. It has no effect if HB2_config =1 &

HB2_tdiag_ext_config = 0.

00: 25.6 µs

01: 61.2 µs

10: 105.6 µs

11: 150 µs

[21] OC_READ_07: Selection of the OC threshold to read. Fixed threshold or actual threshold.

0: Read fixed OC threshold

1: Read actual OC threshold

[20:15] OC_CONFIG_07: Selection of over current detection threshold. 6 bit to code for the OC detection threshold

See Table 40

[14:13] OC_TEMP_COMP_07: Over current detection with temperature compensation (see note of Table 30. SPI MOSI list)

00: No OC compensation

01: ΔT < 60 °C

10: ΔT < 40 °C

11: ΔT < 25 °C

L9945

SPI MOSI/MISO list

DS12275 - Rev 8

page 64/151

L9945TR データシート(PDF) 64 Page - STMicroelectronics

L9945TR データシート(HTML) 64 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

データシートダウンロード