MFS5600AMBAFES datasheet(21/118 Pages) NXP

21 / 118 page

NXP Semiconductors

FS5600

Automotive buck regulator and controller with voltage monitors and watchdog timer

OTP_SW1_SLOPECOMP[1:0]

Slope compensation (mV/µs)

67.5

112.5

Table 15. OTP_SW1_SLOPECOMP[1:0] Value

OTP_SW1_GM_COMP[1:0]

Transconductance (µS)

Table 16. OTP_SW1_GM_COMP[1:0] Value

OTP_SW1_PWM_R_COMP[2:0]

Compensation resistor (kΩ)

000

150

001

300

010

450

011

600

100

750

101

900

110

1050

111

1200

Table 17. OTP_SW1_PWM_R_COMP[2:0] Value

11.3.7 SW1 fault monitoring

The SW1FB pin voltage is compared against an internal reference to detect undervoltage and overvoltage faults

in SW1. See Table 8 for monitoring thresholds.

When OTP_SW1_OV_PGOOD1 = 1, an overvoltage fault on SW1 asserts PGOOD1. Similarly, when

OTP_SW1_OV_PGOOD2 = 1, an overvoltage fault on SW1 asserts PGOOD2.

When OTP_SW1_UV_PGOOD1 = 1, an undervoltage fault on SW1 asserts PGOOD1. Similarly, when

OTP_SW1_UV_PGOOD2 = 1, an undervoltage fault on SW1 asserts PGOOD2.

The SW1_UV_I and SW1_OV_I bits are latched to 1 respectively if undervoltage and overvoltage faults are

detected. The latch bits can be cleared by writing a 1 to them.

SW1_UV_RT and SW1_OV_RT read-only bits indicate the real-time status of the faults.

FS5600

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 4 — 29 April 2024

21 / 118

MFS5600AMBAFES データシート(PDF) 21 Page - NXP Semiconductors

MFS5600AMBAFES データシート(HTML) 21 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

データシートダウンロード