 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
TMP93CS32F データシート(PDF) 73 Page - Toshiba Semiconductor |
|
|
|||||||||||||||||||||||||||||
TMP93CS32F データシート(HTML) 73 Page - Toshiba Semiconductor |
|
|
73 / 180 page  TMP93CS32 2004-02-10 93CS32-71 ( 4) Comparator A comparator compares the value in the up counter with the values to which the timer register is set. When they match, the up counter is cleared to zero and an interrupt signal (INTT0, INTT1, INTT2, INTT3) is generated. If the timer flip-flop inversion is enabled, the timer flip-flop is inverted at the same time. (5) Timer flip-flop (Timer F/F: TFF1, TFF3) The timer flip-flop (TFF1, TFF3) is a flip-flop inverted by the match detect signal (8-bit comparator output) of each interval timer. Inverting is disabled or enabled by the timer flip-flop control register TFFCR<TFF3IE, TFF1IE>. After reset operation, the value of TFF1 and TFF3 is undefined. Writing “01” or “10” to TFFCR<TFF3C1:0, TFF1C1:0> sets “0” or “1” to TFF1, TFF3. Additionally, writing “00” to this bit inverts the value of TFF1, TFF3 (Software inversion). The signal of TFF3 is output through the TO3 pin (Also used as P41). When using as the timer output, the timer flip-flop should be set by port 4 function register P4FC beforehand. The output pin of TFF1 does not exist. |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
