Page 1

www.sensata.com

Copyright © 2022 Sensata Technologies, Inc.

MODEL LP35 | LP SERIES

LOW PROFILE, NON-INCENDIVE INCREMENTAL OR ABSOLUTE ENCODER

SPECIFICATIONS

Features

Mechanical

• Certified for Class 1, Div 2 (Zone 2), Group A, B, C, D Hazardous

Areas

• Low profile package saves space

• Excellent resistance to shock and vibration

• 30mm standard through shaft, PEEK reduction hub available

• High protection level of IP66

• High performance in temperatures from –40°C to +85°C

• Resolutions up to 10,000 PPR, incremental or 16 BITS absolute

• Terminal box, M12 or cable output terminations

• Encapsulated electronics

• TTL and HTL electronics

• Reinforced electrical output available on some incremental and

absolute models

• Wiring fault tolerant with terminal box connection

• Long cable drive capability

Housing Size

Standard: Ø 90mm X 26mm deep

Terminal Box: 128mm tall X 116mm wide X 25mm deep. (See dimensional drawings for detail)

Shaft Size

Hollow Shaft: Ø 1/2” to Ø 30 mm” blind or through

Solid Shaft: Ø12 mm x 20 mm with keyway, Ø 3/8“x 7/8“ with flat

Hollow Shaft w/ Integrated Coupling: 14mm, 20mm, 1/2”, 3/4”

Permissible Shaft Loads

Axial: 40 N

Radial: 80 N

Shaft Runout

Hollow Shaft: 0.1 mm [0.004”] TIR

Solid Shaft: 0.02 mm [0.001”] TIR

Hollow Shaft w/ Integrated Coupling: N/A (B)

Static/ Dynamic Torque

30 / 300 mN.m [4.2/ 42 oz-in] @ 25°C

Bearings

6807 - Sealed

Material

Cover: Clear anodized aluminum

Body: Clear anodized aluminum

Shaft: AISI 303 stainless steel

Bearing Life L

10h

(Theoretical Mechanical Lifetime)

> 18 X 109 turns / 100000 hours

Continuous Max. Speed

6000 RPM, (Reference Chart 1. Speed vs Temperature)

Shaft Moment of Inertia

< 84000 g.mm2[11.9 x 10-3 oz*in*sec2 ]

Weight (approx.)

Terminal Box: 790g

M12 or cable: 450g