www.sensata.com

Page 10

Copyright © 2022 Sensata Technologies, Inc.

AGENCY APPROVALS & CERTIFICATIONS

GENERAL NOTES

(A) For detailed installation instructions and recommend screw torques refer to the User’s Manual

(B) For more information refer to the User Manual

ACCESSORIES

The following accessories are included with your LP series encoder as defined by your part number selection.

These commodities, technology or software if exported from

the United States must be in accordance with the Bureau

of Industry and Security, Export Administration regulations.

Diversion contrary to U.S. Law is prohibited.

Class I, Div. 2, Gps A,B,C & D

Cenelec

II 3 G Ex nA IIC T4 Gc

DEMKO 17 ATEX 1877X

IECEx UL 17.0043X

2004 / 108 / CE

Ex nA IIC T4 Gc

Bore Reduction Sleeve

9418/H20 = 20 mm bore

9418/H8E = 1 in. bore

9418/H7E =7/8 in. bore

9418/H6E = 3/4 in. bore

9418/H5E = 5/8 in. bore

9418/H4E = 1/2 in. bore

9418/H3E = 2/8 in. bore

Integrated Coupling Kit

(includes flex, hub and set screws)

M9410/009-14 = 14 mm

M9410/009-20 = 20 mm

M9410/009-E3 =1/4 in.

M9410/009-E4 = 1/2 in.

M9410/009-E5 = 5/8 in.

M9410/009-E6 = 1 in.

Long Tether Arm Kit

M9445/053 = long tether, M8x1 rod

M9445/053-01 = long tether, 3/8”-16 rod

M9445/053-02 = long tether, 1/4”-20 rod

Short Tether Arm Kit

M9455/058 = short tether, M8x1 rod

M9455/058-01 = short tether, 3/8”-16 rod

M9445/058-02 = short tether, 1/4”-20 rod

Tether Pin Kit

M9445/059 = M10x1.5 rod and hardware

M9445/059-01 = 3/8”-16 rod and hardware

M9445/059-02 = 1/4”-20 rod and hardware

Key for 12mm slot

9435/006 = 4X4X12 mm key

Cable Assemblies

Length Model Number

Part Number

0.5m

9416/111-8230/200-GM-005 RAL-005-002

1m

9416/111-8230/200-GM-010 RAL-010-012

2m

9416/111-8230/200-GM-020 RAL-020-035

5m

9416/111-8230/200-GM-050 RAL-050-045

10m

9416/111-8230/200-GM-100 RAL-100-047

Ball End Tether

M9230-04/XXX (XXX=Center-to-center nominal

distance in mm)

Flexible Couplings

Bellows Type

9404/S/12-12 = for use with a 12mm shaft

Triple Beam

Type 39074-12-12 = for use with a 3/8” shaft