STA529Q datasheet(28/57 Pages) STMICROELECTRONICS

部品番号	STA529Q

部品情報	FFX™ audio codec with analog and digital inputs and 2 x 1.2 W (or 2 x 100 mW HP) class-D amplifier

PDF	57 Pages

Scroll/Zoom	100%

メーカー	STMICROELECTRONICS [STMicroelectronics]

ホームページ	http://www.st.com

Logo

28 / 57 page

Driver configuration

STA529

28/57

Doc ID 13095 Rev 3

Driver configuration

A driver configuration is available that allows PWM commands to be used on an external

power device. For this purpose, the output serial audio interface is disabled and the

respective pins have an alternative name and a new function, as shown in Table 19.

The driver configuration is selected with the two programmable registers, PWMINT1 = 0x93

and PWMINT2 = 0x81, on page 51.

8.1

I2S bypass

A configuration is available which allows the passing of the I2S input signal straight to the

I2S output signal.

This configuration is set using two programmable registers PWMINT1 = 0x93 and

PWMINT2 = 0x80.

Table 19.

Pin functions in driver-configuration mode

Alternative pin name and function

BICLKO

PWM1A (external bridge PWM command for output 1A)

LRCLKO

PWM1B (external bridge PWM command for output 1B)

SDATAO

PWM2A (external bridge PWM command for output 2A)

CLKOUT

PWM2B (external bridge PWM command for output 2B)

POWERFAULT

EADP (external audio power-down signal)

STA529Q データシート(PDF) 28 Page - STMicroelectronics