4

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

5. DO NOT overreach. Keep proper footing and balance at all times. This enables

better control of the power tool in unexpected situations.

6. Dress properly. DO NOT wear loose clothing or jewellery. Keep your hair, clothing

and gloves away from moving parts. Loose clothes, jewellery or long hair can be

caught in moving parts.

POWER TOOL USE AND CARE

1. DO NOT force the power tool. Use the correct accessories for your application.

The correct power tool will do the job better and safer at the rate which it was

designed for.

2. DO NOT use the power tool if the switch does not turn it on and off. Any power tool

that cannot be controlled with the switch is dangerous and must be repaired.

3. Disconnect the plug from the power source before changing accessories, or

storing power tools. Such preventive safety measures reduce the risk of starting

the power tool accidentally.

4. Store idle tools out of the reach of children and DO NOT allow persons unfamiliar

with the power tool or these instructions to operate it. Power tools are dangerous

in the hands of untrained users.

5. Maintain power tools. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tool’s

operation. If damaged, have the power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

6. Use the power tool and accessories in accordance with these instructions and in

the manner intended, taking into account the working conditions and the work to

be performed. Use of the power tool for operations different from intended could

result in a hazardous situation.

7. The performance of this tool may vary, depending upon variations in line voltage.

Extension cable usage may also affect performance.

SERVICE

1. Have your power tool serviced by qualified service personnel using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.

ADDITIONAL SAFETY WARNINGS FOR SANDERS

1. Secure the workpiece to a stable platform. Holding the workpiece by hand or

against your body may lead to loss of control.

2. Dust arising from sanding may endanger the health of the operator and possible

bystanders. Wear a dust mask and ensure that persons entering the work area

are also protected.