2

Absolute maximum ratings and operating conditions

Table 1. Absolute maximum ratings

Symbol

Parameter

Value

Unit

VCC

Supply voltage (1)

6

V

Vid

Input voltage differential (2)

±VCC

V

Vin

Input voltage (3)

(VCC-) - 0.2 to (VCC+) + 0.2

V

Iin

Input current (4)

10

mA

Tstg

Storage temperature

-65 to +150

°C

Rthja

Thermal resistance junction-to-ambient (5)(6)

°C / W

SC70-5

205

DFN8 2x2

57

QFN16 3x3

45

MiniSO8

190

TSSOP14

100

Tj

Maximum junction temperature

150

°C

ESD

HBM: human body model (7)

4

kV

MM: machine model (8)

300

V

CDM: charged device model (9)

(all packages except SC70-5 and DFN8)

1.5

kV

CDM: charged device model (SC70-5 and DFN8) (9)

1.3

Latch-up immunity

200

mA

1. All voltage values, except differential voltages are with respect to network ground terminal.

2. Differential voltages are the non inverting input terminal with respect to the inverting input terminal.

3. VCC -Vin must not exceed 6 V, Vin must not exceed 6 V.

4. Input current must be limited by a resistor in series with the inputs.

5. Short-circuits can cause excessive heating and destructive dissipation.

6. Rth are typical values.

7. Human body model: 100 pF discharged through a 1.5 kΩ resistor between two pins of the device, done for all couples of pin

combinations with other pins floating.

8. Machine model: a 200 pF cap is charged to the specified voltage, then discharged directly between two pins of the device

with no external series resistor (internal resistor < 5 Ω), done for all couples of pin combinations with other pins floating.

9. Charged device model: all pins plus package are charged together to the specified voltage and then discharged directly to

ground.

Table 2. Operating conditions

Symbol

Parameter

Value

Unit

VCC

Supply voltage

2.7 to 5.5

V

Vicm

Common mode input voltage range

VCC- – 0.1 to VCC+ + 0.1

V

Toper

Operating free air temperature range

-40 to +125

°C

TSV521, TSV522, TSV524,TSV521A, TSV522A, TSV524A

Absolute maximum ratings and operating conditions

DS8862 - Rev 4

page 3/29