
5
ANATOMY
OF A HARNESS
10
5
4
3
1. FALL ARREST ATTACHMENT POINT
D-ring (large or small) or loop between shoulder blades for fall
arrest.
2. D-RING EXTENDER
45 cm D-ring or loop extension attached to the back D-ring of the
harness. Makes access to D-ring for lanyard attachment easier
allowing user to check for 100% snap hook gate closure.
3. CHEST STRAP
Webbing which connects the two shoulder straps together.
Connected with a buckle to keep user in harness.
4. LEG CONNECTORS
Available in both pass-through. Allows the user choice in leg clo-
sure suited to the application or worker preference.
5. COMFORT PAD
A soft but firm lumbar support providing support to lower back
in work positioning applications.
6. BODY BELT
Integrated body belt. An excellent support for work positioning
and for tool storage.
7. SUB-PELVIC STRAP
Webbing strap located just below the buttocks provides comfort
in positioning applications and help distributes forces in event of
a fall.
8. WORK POSITIONING D-RINGS
D-rings located at the hip or just above the hip. Side D-rings
are used for work positioning or restraint applications.
9. UP ARROW INDICATOR
Arrows indicating the fall arrest attachment point of the harness.
Up arrows indicate the proper orientation of the harness,
ensuring quick and easy donning.
10. STERNAL LOOPS
Reinforced web loops for use in rescue, ladder climbing and
descent applications.
1
1
2
9
6
8
7