 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
ADE7566 データシート(PDF) 38 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
ADE7566 データシート(HTML) 38 Page - Analog Devices |
|
|
38 / 136 page  ADE7566/ADE7569 Preliminary Technical Data Rev. PrA | Page 38 of 136 Table 32. WAVMODE Register (0x0D) Bit No. Mnemonic Default Description 7 to 5 WAV2SEL[2:0] 000 Waveform 2 Selection for Samples Mode. WAV2SEL[2:0] Source 000 Current 001 Voltage 010 Active power multiplier output 011 Reactive power multiplier output1 100 VA multiplier output 101 Irms LPF output Others Reserved 4 to 2 WAV1SEL[2:0] 000 Waveform 1 Selection for Samples Mode. WAV1SEL[2:0] Source 000 Current 001 Voltage 010 Active power multiplier output 011 Reactive power multiplier output1 100 VA multiplier output 101 Irms LPF output (low 24-bit) Others Reserved 1 to 0 DTRT[1:0] 00 Waveform Samples Output Data Rate. DTRT[1:0] Update Rate (Clock = fCORE/5 = 819.2 kHz) 00 25.6 kSPS (clock/32) 01 12.8 kSPS (clock/64) 10 6.4 kSPS (clock/128) 11 3.2 kSPS (clock/256) 1 This function is not available in the ADE7566 part. Table 33. NLMODE Register (0x0E) Bit No. Mnemonic Default Description 7 DISVARCMP1 0 Setting this bit disables fundamental VAR gain compensation over line frequency. 6 IRMSNOLOAD 0 Logic 1 enables Irms no-load threshold detection. The level is defined by the setting of the VANOLOAD bits. 5 to 4 VANOLOAD[1:0] 00 Apparent Power No-Load Threshold. VANOLOAD[1:0] Result 00 No-load detection disabled 01 No-load enabled with threshold = 0.030% of full scale 10 No-load enabled with threshold = 0.015% of full scale 11 No-load enabled with threshold = 0.0075% of full scale 3 to 2 VARNOLOAD[1:0]1 00 Reactive Power No-Load Threshold VARNOLOAD[1:0] Result 00 No-load detection disabled 01 No-load enabled with threshold = 0.015% of full scale 10 No-load enabled with threshold = 0.0075% of full scale 11 No-load enabled with threshold = 0.0037% of full scale 1 to 0 APNOLOAD[1:0] 00 Active Power No-Load Threshold. APNOLOAD[1:0] Result 00 No-load detection disabled 01 No-load enabled with threshold = 0.015% of full scale 10 No-load enabled with threshold = 0.0075% of full scale 11 No-load enabled with threshold = 0.0037% of full scale 1 This function is not available in the ADE7566 part. |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
