ATmega128 datasheet(72/386 Pages) ATMEL

72 / 386 page

2467S–AVR–07/09

ATmega128

Table 26 summarizes the function of the overriding signals. The pin and port indexes from Fig-

ure 33 are not shown in the succeeding tables. The overriding signals are generated internally in

the modules having the alternate function.

The following subsections shortly describes the alternate functions for each port, and relates the

overriding signals to the alternate function. Refer to the alternate function description for further

details.

Table 26. Generic Description of Overriding Signals for Alternate Functions.

Signal

Name

Full Name

Description

PUOE

Pull-up

Override Enable

If this signal is set, the pull-up enable is controlled by the

PUOV signal. If this signal is cleared, the pull-up is

enabled when {DDxn, PORTxn, PUD} = 0b010.

PUOV

Pull-up

Override Value

If PUOE is set, the pull-up is enabled/disabled when

PUOV is set/cleared, regardless of the setting of the

DDxn, PORTxn, and PUD Register bits.

DDOE

Data Direction

Override Enable

If this signal is set, the Output Driver Enable is controlled

by the DDOV signal. If this signal is cleared, the Output

driver is enabled by the DDxn Register bit.

DDOV

Data Direction

Override Value

If DDOE is set, the Output Driver is enabled/disabled

when DDOV is set/cleared, regardless of the setting of the

DDxn Register bit.

PVOE

Port Value

Override Enable

If this signal is set and the Output Driver is enabled, the

port value is controlled by the PVOV signal. If PVOE is

cleared, and the Output Driver is enabled, the port Value

is controlled by the PORTxn Register bit.

PVOV

Port Value

Override Value

If PVOE is set, the port value is set to PVOV, regardless of

the setting of the PORTxn Register bit.

DIEOE

Digital Input

Enable Override

Enable

If this bit is set, the Digital Input Enable is controlled by the

DIEOV signal. If this signal is cleared, the Digital Input

Enable is determined by MCU-state (Normal mode, Sleep

modes).

DIEOV

Digital Input

Enable Override

Value

If DIEOE is set, the Digital Input is enabled/disabled when

DIEOV is set/cleared, regardless of the MCU state

(Normal mode, Sleep modes).

Digital Input

This is the Digital Input to alternate functions. In the

figure, the signal is connected to the output of the schmitt

trigger but before the synchronizer. Unless the Digital

Input is used as a clock source, the module with the

alternate function will use its own synchronizer.

AIO

Analog

Input/output

This is the Analog Input/output to/from alternate functions.

The signal is connected directly to the pad, and can be

used bi-directionally.

ATmega128 データシート(PDF) 72 Page - ATMEL Corporation

ATmega128 データシート(HTML) 72 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

データシートダウンロード

リンク URL

ATmega128 データシート(PDF) 72 Page - ATMEL Corporation

ATmega128 データシート(HTML) 72 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

データシート ダウンロード

リンク URL

データシートダウンロード