データシートサーチシステム
  Japanese  ▼
ALLDATASHEET.JP

X  

ADT7462ACPZ-R7 データシート(PDF) 4 Page - ON Semiconductor

部品番号 ADT7462ACPZ-R7
部品情報  Flexible Temperature, Voltage Monitor, and System Fan Controller
PDF  81 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
メーカー  ONSEMI [ON Semiconductor]
ホームページ  http://www.onsemi.com
Logo ONSEMI - ON Semiconductor

ADT7462ACPZ-R7 データシート(HTML) 4 Page - ON Semiconductor

  ADT7462ACPZ-R7 Datasheet HTML 1Page - ON Semiconductor ADT7462ACPZ-R7 Datasheet HTML 2Page - ON Semiconductor ADT7462ACPZ-R7 Datasheet HTML 3Page - ON Semiconductor ADT7462ACPZ-R7 Datasheet HTML 4Page - ON Semiconductor ADT7462ACPZ-R7 Datasheet HTML 5Page - ON Semiconductor ADT7462ACPZ-R7 Datasheet HTML 6Page - ON Semiconductor ADT7462ACPZ-R7 Datasheet HTML 7Page - ON Semiconductor ADT7462ACPZ-R7 Datasheet HTML 8Page - ON Semiconductor ADT7462ACPZ-R7 Datasheet HTML 9Page - ON Semiconductor Next Button
Zoom Inzoom in Zoom Outzoom out
 4 / 81 page
background image
ADT7462
http://onsemi.com
4
Pin
No.
POR
Default
Description
Mnemonic
22
TACH8/+12V3
TACH8: Digital Input (Open Drain). Fan tachometer input to measure speed of Fan 8.
+12V3: Analog Input. Monitors 12 V Power Supply 3.
TACH8
23
VCCP1/+1.5V/+1.8V/+2.5V
VCCP1: Monitors 1.2 V analog input.
+1.5V: Monitors 1.5 V analog input.
+1.8V: Monitors 1.8 V analog input.
+2.5V: Monitors 2.5 V analog input.
+1.8V
24
VCCP2/+1.5V/+1.8V/+2.5V
VCCP2: Monitors 1.2 V analog input.
+1.5V: Monitors 1.5 V analog input.
+1.8V: Monitors 1.8 V analog input.
+2.5V: Monitors 2.5 V analog input.
+2.5V
25
VR_HOT1/+1.2V1/+3.3V
VR_HOT1: Digital Input Indicating Overtemperature Event on Voltage Regulator.
+1.2V1: 0 V to 1.2 V Analog Input. For example, can be used to monitor GBIT.
+3.3V: Analog Input. Monitors 3.3 V power supply.
+3.3V
26
VR_HOT2/+1.2V2/VBATT
VR_HOT2: Digital Input Indicating Overtemperature Event on Voltage Regulator.
+1.2V2: 0 V to 1.2 V Analog Input. For example, can be used to monitor FSB_VTT.
VBATT: Analog Input. Monitors battery voltage, nominally 3.0 V.
VBATT
27
FAN2MAX/CI
FAN2MAX: Sets fan to maximum speed when a fan fault condition occurs.
Bidirectional open drain, active low I/O.
CI: An active high input that captures a chassis intrusion event in Bit 7 of the
digital status register. This bit remains set until cleared, as long as battery voltage
is applied to the VBATT input, even when the ADT7462 is powered off.
CI
28
THERM1/+1.5V1/GPIO7/VID6
THERM1: Can be reconfigured as a bidirectional THERM pin. Can be connected
to the PROCHOT output of the Intel® Pentium® 4 processor to time and monitor
PROCHOT assertions. Can be used as an output to signal overtemperature
conditions or for clock modulation purposes.
+1.5V1: 0 V to 1.5 V Analog Input. Can be used to monitor ICH.
GPIO7: Open−Drain I/O. General−purpose input/output.
VID6: Digital Input (Open Drain). Voltage supply readouts from CPU. This value
is read in to the VID value register (0x97).
THERM1
29
THERM2/+1.5V2/GPIO8
THERM2: Can be reconfigured as a bidirectional THERM pin. Can be connected
to the PROCHOT output of the Intel Pentium 4 processor to time and monitor
PROCHOT assertions. Can be used as an output to signal overtemperature
conditions or for clock modulation purposes.
+1.5V2: 0 V to 1.5 V Analog Input. Can be used to monitor 3GIO.
GPIO8: Open−Drain I/O. General−purpose input/output.
THERM2
30
PWM3
Digital Output (Open Drain). Requires 10 kW typical pullup. Pulse−width
modulated output to control the speed of Fan 3.
PWM3
31
VID4/GPIO5/PWM1
VID4: Digital Input (Open Drain). Voltage supply readouts from CPU. This value
is read in to the VID value register (0x97).
GPIO5: Open−Drain I/O. General−purpose input/output.
PWM1: Digital Output (Open Drain). Requires 10 kW typical pullup. Pulse−width
modulated output to control the speed of Fan 1.
PWM1
32
VID5/GPIO6/PWM2
VID5: Digital Input (Open Drain). Voltage supply readouts from CPU. This value
is read in to the VID value register (0x97).
GPIO6: Open−Drain I/O. General−purpose input/output.
PWM2: Digital Output (Open Drain). Requires 10 kW typical pullup. Pulse−width
modulated output to control the speed of Fan 2.
PWM2



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81


データシート ダウンロード

Go To PDF Page


リンク URL



ALLDATASHEETはお客様のビジネスに役立ちますか?  [ DONATE ] 

Alldatasheetは   |   広告   |   お問い合わせ   |   プライバシーポリシー   |   データシートへのリンク    |   リンク交換   |   メーカーリスト
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com