Evaluation Kit User Manual for PIC Board

EV6000

CML does not assume any responsibility for the use of any circuitry described. No IPR or circuit patent

licences are implied. CML reserves the right at any time without notice to change the said circuitry and

this evaluation kit specification. Evaluation kits are supplied for the sole purpose of demonstrating the

operation of CML products and are supplied without warranty. They are intended for use in a

laboratory environment only and are not for re-sale, end-use or incorporation into other equipments.

Operation of evaluation kits outside a laboratory environment is not permitted within the European

Community. All software is supplied "as is" and is without warranty. It forms part of the evaluation kit

and is licensed for use only in this kit, for the purpose of demonstrating the operation of CML products.

Whilst all reasonable efforts are made to ensure that software contained in this product is virus free,

CML accepts no responsibility whatsoever for any contamination which results from using this software

and the onus for checking that the software is virus free is placed on the purchaser of this evaluation

kit.

CONSUMER MICROCIRCUITS LIMITED

1 WHEATON ROAD

Telephone:

+44 1376 513833

WITHAM - ESSEX

Telefax:

+44 1376 518247

CM8 3TD - ENGLAND

e-mail:

sales@cmlmicro.co.uk

http://www.cmlmicro.co.uk

Notes:

1.

Not including any current drawn from the board connector pins by external circuitry.

2.

Timing for an external input to the OSC1 pin.

3.

When

µC pin is configured as an input.

4.

When

µC pin is configured as an output.

Operating Characteristics - Timing Diagrams

For

µC timing information and operating characteristics, see manufacturer's literature (Arizona Microchip

Technology).

For FX602/FX604/FX614 timing information and operating characteristics, refer to CML Data Sheets.