MPL3115A2

Sensors

18

Freescale Semiconductor, Inc.

The number of bytes per transfer is unlimited. If the master can't receive another complete byte of data until it has performed

some other function, it can hold the clock line, SCL low to force the transmitter into a wait state. Data transfer only continues when

the master is ready for another byte and releases the clock line.

A low to high transition on the SDA line while the SCL line is high is defined as a stop condition (STOP). A data transfer is

always terminated by a STOP. A master may also issue a repeated START during a data transfer. Device expects repeated

STARTs to be used to randomly read from specific registers.

Consult factory for alternate addresses. For further information and examples, please read application note AN4519 Sensor