KTPFPGMEVMEUG datasheet(43/48 Pages) FREESCALE

部品番号	KTPFPGMEVMEUG

部品情報	KITPFPGMEVME Programmer for PF Series Devices

PDF	48 Pages

Scroll/Zoom	100%

メーカー	FREESCALE [Freescale Semiconductor, Inc]

ホームページ	http://www.freescale.com

Logo

43 / 48 page

KTPFPGMEVMEUG, Rev. 2.0

Freescale Semiconductor

Graphical User Interface Description

6.6

OTP Programming with the KITPFPGMEVME

The KITPFPGMEVME allows programming the OTP fuses on the target board attached. At this point it might be

a good idea to check if the PF0100 part to be programmed is blank (not programmed). This can be easily done by

pressing the “OTP Blank?” button.

If you would like the KITPF0100GUI to verify that a part has been programmed with the OTP data supplied by the

programming script, click the “Verify After Programming” check box. This will direct the GUI to do a line-by-line

comparison between the data written and the data actually programmed into the part.

0x0050

Figure 38. Verify After Programming and OTP Blank?

Then press the “PROGRAM” button. The KITPF0100GUI will verify that the script file has been loaded and the

supply voltages have been applied before starting the programming sequence. Each step of the programming

sequence will be displayed in the Log List.

KTPFPGMEVMEUG データシート(PDF) 43 Page - Freescale Semiconductor, Inc