AD7655

Rev. B | Page 7 of 28

ABSOLUTE MAXIMUM RATINGS

Table 5.

Parameter

Values

Analog Input

INAx1, INBx1, REFx, INxN, REFGND

AVDD + 0.3 V to

AGND − 0.3 V

Ground Voltage Differences

AGND, DGND, OGND

±0.3 V

Supply Voltages

AVDD, DVDD, OVDD

–0.3 V to +7 V

AVDD to DVDD, AVDD to OVDD

±7 V

DVDD to OVDD

−0.3 V to +7 V

Digital Inputs

−0.3 V to DVDD + 0.3 V

Internal Power Dissipation2

700 mW

Internal Power Dissipation3

2.5 W

Junction Temperature

150°C

Storage Temperature Range

−65°C to +150°C

Lead Temperature Range

(Soldering 10 sec)

300°C

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability.

TO OUTPUT

PIN

60pF*

500

μA

1.6mA

1.4V

*IN SERIAL INTERFACE MODES, THE SYNC, SCLK, AND

SDOUT TIMINGS ARE DEFINED WITH A MAXIMUM LOAD

Figure 2. Load Circuit for Digital Interface Timing

0.8V

2V

2V

0.8V

2V

0.8V

Figure 3. Voltage Reference Levels for Timing

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate

on the human body and test equipment and can discharge without detection. Although this product

features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to

high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid

performance degradation or loss of functionality.